[mythtv-users] MCE usb remote receiver - a quick note for people with USB 3.0 MB's.

[Raymond Norton]

Could this have anything to do with the erratic results I was 
experiencing in my post:

"can't get play- pause to work on remote" (usb mce)

One box I am trying to get my remote to work on is my Zotac mini


lspci -v|grep HCI
00:04.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller 
(rev b1) (prog-if 10 [OHCI])
00:04.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller 
(rev b1) (prog-if 20 [EHCI])
00:06.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller 
(rev b1) (prog-if 10 [OHCI])
00:06.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller 
(rev b1) (prog-if 20 [EHCI])

Any reason the Vista MCE remote would have troubles working on this box?





On 02/27/2012 01:16 PM, Andrew Stadt wrote:
> On 27/02/2012 1:54 PM, Simon Jones wrote:
>>      Defective mceusb right?  No.  Turns out that all my spare ports on the
>>      back on the new machine were usb 3.0 and for whatever reason, none of
>>      the three mceusb units I have will work on these ports... they are
>>      detected, lsub shows them, the right modules are loaded, but they
>>      don't
>>      work.
>>
>>
>> My mceusb works perfect on a usb3 port, in fact it's more reliable on
>> a usb3 than the usb2 ports.
>>
>> Not sure what kernel your running but maybe your running a too old
>> kernel for the usb3 ports and mce working together.
>>
>> Regards,
>>
>>
> Normally I customize all my kernels, but this one is stock debian.
> 3.2.0-1-amd64
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>