[mythtv-users] Hauppauge 2250 help?

Anthony Messina amessina at messinet.com
Wed Apr 4 23:19:04 UTC 2012


On 04/04/2012 11:40 AM, Greg wrote:
>  I have been trying to get this card going on the analog  side for over
> a week... It works just fine,using it for digital capture,but under
> analog it plays for about 1 second then gives me a blue screen and very
> loud audio.... I run an new enough kernel that the digital just works..
> I downloaded the analog firmware and placed it in the /lib/firmware dir
> and it shows up in dmesg as loaded... If there's any thing I'm missing
> could someone point me in the right direction?  Under mythtv-setup I
> installed it as a mpeg2 device....
>   I thought the card was bad,but I had a spare hard drive with Windows 7
> installed,so I plugged it in and installed the card and it work fine on
> both digital and analog...

I also have it setup as an MPEG device and I also have 'audioratelimit'
set to 48000 in the mythconverg db.

I'm using a fully upgraded Fedora 16 3.3.0-8.fc16.x86_64 and have no
issue getting /dev/video0 to work, the first analog tuner on the card.

The only time I've seen the issue you describe is when I'm trying to use
/dev/video1, the second analog tuner on the card -- which I've never
been able to get to work.

Do you have all of the following installed from
http://www.steventoth.net/linux/hvr22xx/ ?
/lib/firmware/NXP7164-2010-03-10.1.fw
/lib/firmware/dvb-fe-tda10048-1.0.fw
/lib/firmware/v4l-saa7164-1.0.2.fw
/lib/firmware/v4l-saa7164-1.0.3.fw

What do you get when you `cat /dev/video0 > test.mpeg` and play that file?

[   24.080689] Linux video capture interface: v2.00
[   24.082399] saa7164 driver loaded
[   24.083211] CORE saa7164[0]: subsystem: 0070:8851, board: Hauppauge
WinTV-HVR2250 [card=7,autodetected]
[   24.083215] saa7164[0]/0: found at 0000:03:00.0, rev: 129, irq: 16,
latency: 0, mmio: 0xfb800000
[   24.192496] saa7164_downloadfirmware() no first image
[   24.192509] saa7164_downloadfirmware() Waiting for firmware upload
(NXP7164-2010-03-10.1.fw)
[   24.200848] saa7164_downloadfirmware() firmware read 4019072 bytes.
[   24.200851] saa7164_downloadfirmware() firmware loaded.
[   24.200852] Firmware file header part 1:
[   24.200853]  .FirmwareSize = 0x0
[   24.200854]  .BSLSize = 0x0
[   24.200855]  .Reserved = 0x3d538
[   24.200856]  .Version = 0x3
[   24.200857] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072
[   24.200863] saa7164_downloadfirmware() FirmwareSize = 0x1fd6
[   24.200864] saa7164_downloadfirmware() BSLSize = 0x0
[   24.200865] saa7164_downloadfirmware() Reserved = 0x0
[   24.200866] saa7164_downloadfirmware() Version = 0x1661c00
[   30.848828] saa7164_downloadimage() Image downloaded, booting...
[   30.949590] saa7164_downloadimage() Image booted successfully.
[   30.949624] starting firmware download(2)
[   32.668259] saa7164_downloadimage() Image downloaded, booting...
[   34.985443] saa7164_downloadimage() Image booted successfully.
[   34.985475] firmware download complete.
[   35.030946] tveeprom 4-0000: Hauppauge model 88061, rev C4F2, serial#
8798592
[   35.030951] tveeprom 4-0000: MAC address is 00:0d:fe:86:41:80
[   35.030955] tveeprom 4-0000: tuner model is NXP 18271C2_716x (idx
152, type 4)
[   35.030959] tveeprom 4-0000: TV standards NTSC(M) ATSC/DVB Digital
(eeprom 0x88)
[   35.030963] tveeprom 4-0000: audio processor is SAA7164 (idx 43)
[   35.030966] tveeprom 4-0000: decoder processor is SAA7164 (idx 40)
[   35.030969] tveeprom 4-0000: has radio, has IR receiver, has no IR
transmitter
[   35.030972] saa7164[0]: Hauppauge eeprom: model=88061
[   35.363340] tda18271 5-0060: creating new instance
[   35.367865] TDA18271HD/C2 detected @ 5-0060
[   35.574837] DVB: registering new adapter (saa7164)
[   35.574868] DVB: registering adapter 0 frontend 0 (Samsung S5H1411
QAM/8VSB Frontend)...
[   35.863229] tda18271 6-0060: creating new instance
[   35.867549] TDA18271HD/C2 detected @ 6-0060
[   36.069411] tda18271: performing RF tracking filter calibration
[   38.330924] tda18271: RF tracking filter calibration complete
[   38.332254] DVB: registering new adapter (saa7164)
[   38.332259] DVB: registering adapter 1 frontend 0 (Samsung S5H1411
QAM/8VSB Frontend)...
[   38.333118] saa7164[0]: registered device video0 [mpeg]
[   38.563667] saa7164[0]: registered device video1 [mpeg]
[   38.773634] saa7164[0]: registered device vbi0 [vbi]
[   38.773756] saa7164[0]: registered device vbi1 [vbi]

-- 
Anthony - http://messinet.com - http://messinet.com/~amessina/gallery
8F89 5E72 8DF0 BCF0 10BE 9967 92DC 35DC B001 4A4E

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://www.mythtv.org/pipermail/mythtv-users/attachments/20120404/2f30d171/attachment.sig>


More information about the mythtv-users mailing list