[mythtv-users] Encoder disappears

[Mike Perkins]

barbex wrote:
> 
> 2010-09-23 12:29:45.283 Program #515 not found in PAT!
> Program Association Table
>  PSIP tableID(0x0) length(29) extension(0x1001)
>       version(5) current(1) section(0) last_section(0)
>          tsid: 4097
>  programCount: 5
>   program number     0 has PID 0x  10   data  0x 0 0x 0 0xe0 0x10
>   program number 19072 has PID 0x a80   data  0x4a 0x80 0xea 0x80
>   program number 16420 has PID 0x 240   data  0x40 0x24 0xe2 0x40
>   program number 16401 has PID 0x 110   data  0x40 0x11 0xe1 0x10
>   program number 16426 has PID 0x 2a0   data  0x40 0x2a 0xe2 0xa0
> 
This usually means that the guys at the transmitter ends moved the goalposts on 
you. That is, the channels currently being output in each of the multiplexes 
aren't the same as they were when you last scanned. Something got moved. Either 
there's a new channel myth doesn't know about, or there's a channel myth expects 
to find in a particular multiplex which is no longer there. (Could be multiple 
channel changes. In the UK, Freeview does this every few months. I expect this 
to continue until things settle down sometime after 2012.)

It invariably means a rescan. This might clear up some of your problems (though 
possibly, not all of what you described).

-- 

Mike Perkins