[mythtv-users] Possible to use a Hauppauge WinTV-HVR 950Q with MythTV?

[Adam Jimerson]

On Tue, Sep 7, 2010 at 6:31 PM, Adam Jimerson <vendion at gmail.com> wrote:

> On Tue, Sep 7, 2010 at 5:31 PM, Devin Heitmueller <
> dheitmueller at kernellabs.com> wrote:
>
>> On Tue, Sep 7, 2010 at 5:17 PM, Adam Jimerson <vendion at gmail.com> wrote:
>>
>>>
>>> Judging from the colsole output I'm running "branches/release-0-23-fixes"
>>> according to pacman it is mythtv 25574-1, but the color issue was just that
>>> the Hue was down to 0% and that was an easy fix (mythtv does remember
>>> settings like that right?).  As for sound I have the sampling rate at 48KHz
>>> but how would I set the ALSA device to my soundcard which is hw:0,0
>>> according to "arecord -l"
>>>
>>> Bear in mind we're talking about the ALSA *capture* device built into the
>> HVR-950q, not the sound card that you output to.  You can run "arecord -l"
>> to determine which capture device is the 950q (it's commonly hw:1,0 if you
>> only have a single sound card installed and the 950q).  From there you need
>> to set the appropriate capture ALSA device within mythtv-setup.
>>
>> If you cannot output audio at all, that is outside the scope of the 950q
>> support and somebody else could better answer your question.
>>
>>
>> --
>> Devin J. Heitmueller - Kernel Labs
>> http://www.kernellabs.com
>>
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users at mythtv.org
>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>
>>
> Ok so what is the format that mythtv-setup expects does it want it in the
> "hw:1,0" form or following one of the options in the drop down
> "ALSA:Default", if it helps here is the output from arecord -l
>
> vendion ~ $ arecord -l
>
> **** List of CAPTURE Hardware Devices ****
>
> card 0: SB [HDA ATI SB], device 0: ALC1200 Analog [ALC1200 Analog]
>
>   Subdevices: 1/1
>
>   Subdevice #0: subdevice #0
>
> card 0: SB [HDA ATI SB], device 1: ALC1200 Digital [ALC1200 Digital]
>
>   Subdevices: 1/1
>
>   Subdevice #0: subdevice #0
>
> card 0: SB [HDA ATI SB], device 2: ALC1200 Analog [ALC1200 Analog]
>
>   Subdevices: 1/1
>
>   Subdevice #0: subdevice #0
>
> card 2: HVR950Q [HVR-950Q], device 0: USB Audio [USB Audio]
>
>   Subdevices: 1/1
>
>   Subdevice #0: subdevice #0
>
>
>
Ok so I can get audio to work with tvtime using hw:2,0 but the trick is
getting that in a format MythTv likes, any help?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mythtv.org/pipermail/mythtv-users/attachments/20100907/e76a3b5f/attachment.htm>