[mythtv-users] 0.24 recording troubles
Greg Oliver
oliver.greg at gmail.com
Tue Nov 16 21:46:54 UTC 2010
On Tue, Nov 16, 2010 at 3:30 PM, Eloy Paris <peloy at chapus.net> wrote:
> Hello,
>
> On Tue, Nov 16, 2010 at 08:36:37AM -0800, Douglas Peale wrote:
>
>> I'm using two HDHomeRun boxes (four tuners), and not seeing this issue
>> when a second recording starts on the same tuner, or when a second
>> recording starts on a different tuner. At most there is a slight
>> glitch in the recording when another recording starts in the middle of
>> a recording.
>
> I think I got to the bottom of my issue -- in mythtv-setup, where one
> adds the HDHomeRun tuners to the configuration, in the menu "Available
> Devices" one can choose "manually enter IP address", and then enter IP
> address of HDHomeRun and tuner to use, or one can select from a list of
> auto-discovered devices. I have always used the manual method (enter
> IP addr. and tuner) but it seems like if one configures the HDHomeRun
> device manually in 0.24 things don't work and Myth never uses tuner 1
> (I confirmed that Myth does not try to use tuner 1 by capturing traffic
> during simultaneous recording and looking at the control traffic between
> Myth and the HDHR -- I can see the commands being sent to the HDHR and
> the responses since they show up in plain ASCII on the wire, and I never
> see Myth try to use tuner1).
>
> After deleting all capture cards and re-adding the HDHomeRun tuners by
> using the auto-discovered devices I was able to get things to work.
>
> The difference between manual config. and using discovered devices in
> the database is that when using manual config, "videodevice" in the
> capturecard table shows as 10.10.13.13-0, and when using auto-discovered
> devices "videodevice" shows as 10194703-0. Guess something does not like
> the a.b.c.d-n format.
>
> This seems like a bug in some part of Myth (or in the HDHomeRun
> library). I'll go file a bug unless someone thinks this is some other
> problem.
>
> Douglas, if you configured your HDHomeRuns by manually entering IP
> addresses and tuner numbers then that ruins my theory.
>
I have a couple dual tuner hdhrs as well, and have not hit your issue,
but I have never manually configured them. In the example above, are
you saying the IP dotted notation-0 was the name you typed in
manually, or mythtv made it up on it's own?
Asking so I can file it away in my head as another naming convention I
have to keep up with as invalid for one reason or another!
Thanks
More information about the mythtv-users
mailing list