[mythtv-users] Comcast DTA direct channel change?

[Scott]

On 03/25/2010 06:50 PM, Scott wrote:
> On 03/25/2010 06:38 PM, Greg Oliver wrote:
>   
>> On Thu, Mar 25, 2010 at 5:36 PM, Scott <pickle136 at sbcglobal.net> wrote:
>>   
>>     
>>> On 03/25/2010 05:06 PM, Ron Garrison wrote:
>>>     
>>>       
>>>> After much reading of other people's posts I'm fairly confident that
>>>> the above cable should work with either the Iguana IR or the GP-IR02BK
>>>> mentioned by Kirk in another post.  So I went with the following:
>>>>
>>>> 2 cables from
>>>> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=320446555397
>>>>
>>>> 1 IR transmitter box (actually remote with ir receiver that supports 2 emitters)
>>>> http://www.newegg.com/Product/Product.aspx?Item=N82E16880121002
>>>>       
>>>>         
>>>     
>>>       
>>>> I believe the codes that Kirk put together should also work based on
>>>> what I've read elswhere.  I will let you know how it all works out
>>>> once I receive the items and get a chance to integrate them.
>>>>
>>>> Ron
>>>> _______________________________________________
>>>> mythtv-users mailing list
>>>> mythtv-users at mythtv.org
>>>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>>>
>>>>
>>>>       
>>>>         
>>> As i expected my mce remote has arrived.
>>> Hooked up and instantly detected by lirc_mceusb Cool!
>>>
>>> dmesg | grep lirc
>>> [   32.241651] lirc_dev: IR Remote Control driver registered, major 61
>>> [   32.481062] lirc_i2c: chip 0x10020 found @ 0x71 (Hauppauge PVR150)
>>> [   32.481073] lirc_dev: lirc_register_driver: sample_rate: 10
>>> [244898.140653] lirc_mceusb: Windows Media Center Edition USB IR
>>> Transceiver driver for LIRC 1.90
>>> [244898.140674] lirc_mceusb: Daniel Melander <lirc at rajidae.se>, Martin
>>> Blatter <martin_a_blatter at yahoo.com>, Dan Conti <dconti at acm.wwu.edu>
>>> [244898.406899] lirc_dev: lirc_register_driver: sample_rate: 0
>>> [244898.411884] lirc_mceusb[2]: Topseed Technology Corp. eHome Infrared
>>> Transceiver on usb2:2
>>>
>>>
>>> Ran this /usr/sbin/lircd --driver=default --device=/dev/lirc1
>>> --output=/dev/lircd1 --pidfile=/var/run/lircd1.pid
>>>
>>> ls -l /dev/ | grep lirc
>>> crw-rw-rw-  1 mythtv root     61,   0 2010-03-22 22:00 lirc0
>>> crw-rw-rw-  1 mythtv root     61,   1 2010-03-25 18:01 lirc1
>>> lrwxrwxrwx  1 root   root          19 2010-03-22 22:00 lircd ->
>>> /var/run/lirc/lircd
>>> srw-rw-rw-  1 root   root           0 2010-03-25 18:16 lircd1
>>>
>>> Sent this and no errors reported
>>> irsend --device=/dev/lircd1 SET_TRANSMITTERS 1
>>> irsend --device=/dev/lircd1 SEND_ONCE MotorolaDTA100-PaceDC50X KEY_9
>>>
>>> although i havnt seen the ir cable flash, its has the red casing, should
>>> i be seeing it flicker/flash? Also tried the camera trick, but didnt see
>>> anything.
>>>
>>>     
>>>       
>> You probably have the 0x008 version..  You'll need to compile lirc
>> from cvs for blasting to work..
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users at mythtv.org
>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>
>>   
>>     
> Yeah i thought about that you said that before you replied.
> Do you happen to remember the configure options you used?
>   
Just went ahead and built it with mceusb, im still not getting any
response from irw or irsend.