[mythtv-users] OT: SSD issues

[freedenizen]

On Wed, Mar 10, 2010 at 10:20 AM, Alan Young <ayoung at teleport.com> wrote:
> I'm not sure which driver you are using, but you might try disabling NCQ on
> the drive.  There's a couple of different boot parameters depending on the
> driver or device.  If you know you're are using libata, you can disable it
> globally for all drives with libata.force=noncq.  But you'll probably want
> to dig further to limit it to just the controller and/or drives affected.
>
> You should also post this issue to the linux ide mailing list.  See
> http://vger.kernel.org/vger-lists.html for how to subscribe and the archives
> of the list.  The members of that list should be able to help figure out the
> problem (even if disabling noncq works as a workaround).

I'll give that a shot, but isn't ncq disabled when I have the SATA
controller set to compatibility (non-ahci) mode?
Also I should add that I see weird other issues, like I have to
rmmod/modprobe hdpvr a few times before the 2 devices both show up,
none of this happens when booting off of the non-ssd HD.  Same kernel,
and should be all the same files on both devices, rsync'd from the HD
to the SSD...

I'll also post this to the other list after further testing.