[mythtv-users] HD-PVR slow remote

[Scott Bickford]

On Fri, Jul 30, 2010 at 2:04 PM, Jarod Wilson <jarod at wilsonet.com> wrote:

> On Thu, Jul 29, 2010 at 1:25 PM, Scott Bickford <bic1ster at gmail.com>
> wrote:
> >>
> >>
> >> > cat lirc.conf
> >> >
> >> > #lirc_module_configuration
> >> > alias char-major-61 lirc_zilog
> >>
> >> Did you put the above in there, or did mythdora? In either case, its
> >> *wrong*. :)
> >
> > That could of been from an HVR-1600, which is now out of the box.
> >
> >>
> >> > ls /dev/lirc* -alh
> >> >
> >> > crw-rw---- 1 root root 248, 0 2010-07-23 06:22 /dev/lirc0
> >>
> >> As you can see here, your lirc device has a character device major
> >> number of 248, not 61. We use dynamic misc chardev number assignments
> >> now (first free number, going backwards from 255, iirc), not a static
> >> one.
> >
> > I commented that out, rm'd /dev/lirc,
>
> The commenting out part was correct, but don't rm /dev/lirc*, that's
> supposed to be there, I was just pointing out that what was there has
> a device major of 248 (correctly assigned dynamically), not 61.
>
> > did various power downs.  Now it's
> > locking up after 2 minutes of recording as well as this in the backend
> log:
> >
> > 2010-07-29 09:00:52.170 adding: localhost.localdomain as a client
> (events:
> > 0)
> > 2010-07-29 09:00:52.178 RecBase(1:/dev/video0):
> > GetKeyframePositions(1022,9223372036854775807,#0) out of 9
> > 2010-07-29 09:01:14.836 DevRdB(/dev/video0) Error: Poll giving up
> > 2010-07-29 09:01:14.852 MPEGRec(/dev/video0) Error: Device error detected
> > 2010-07-29 09:01:14.858 DevRdB(/dev/video0): Stop(): Not running.
> > 2010-07-29 09:01:56.967 MPEGRec(/dev/video0) Error: StartEncoding failed
> >                         eno: Resource temporarily unavailable (11)
> > 2010-07-29 09:01:59.979 MPEGRec(/dev/video0) Warning: Unable to set audio
> > input.
> > 2010-07-29 09:03:01.652 AutoExpire: CalcParams(): Max required Free
> Space:
> > 3.0 GB w/freq: 15 min
> > 2010-07-29 09:08:57.033 RecBase(1:/dev/video0):
> > GetKeyframePositions(1022,9223372036854775807,#5) out of 14
> > 2010-07-29 09:09:11.139 RecBase(1:/dev/video0):
> > GetKeyframePositions(1662,9223372036854775807,#0) out of 14
> > 2010-07-29 09:09:11.152 Dec: DoFastForward(): desiredFrame(1710) >
> > last_frame(1661)
> > 2010-07-29 09:09:11.185 Dec: DoFastForward(): Desired frame is way past
> the
> > end of the keyframe map!
> >                         Seeking to last keyframe instead.
> > 2010-07-29 09:09:14.362 [h264 @ 0x391264a5c0]error while decoding MB 109
> 36,
> > bytestream (-4)
> > 2010-07-29 09:09:14.376 [h264 @ 0x391264a5c0]missing picture in access
> unit
> > 2010-07-29 09:09:15.812 ProgramInfo(): Updated pathname '':'' ->
> > '1727_20100729090000.mpg'
> >
> >
> > Also filling messages every second:
> >
> > Jul 29 13:08:45 localhost kernel: lirc_zilog: i2c_master_send failed with
> > -110
> > Jul 29 13:08:45 localhost kernel: lirc_zilog: polling the IR receiver
> chip
> > failed, trying reset
>
> What firmware version do you have on your hdpvr? If its not 0x15,
> might be worth doing an update (which unfortunately, can only be done
> under windows). Looks similar to what others have reported in the
> past, and its something still in need of investigation at the driver
> level.
>
>
> --
> Jarod Wilson
> jarod at wilsonet.com
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mythtv.org/pipermail/mythtv-users/attachments/20100731/719b9c3d/attachment.htm>