[mythtv-users] Udev Help

[greg]

John P Poet wrote:
> On Tue, Feb 2, 2010 at 4:00 PM, greg <greg12866 at nycap.rr.com> wrote:
>   
>>  I've been fighting an issue where my HD_PVR and Pvr-150 has been swapping
>> nodes.. I have tried every solution I can find, and none of them seem to
>> work..
>> I have developed 2 rules and they seemed to work,but after a reboot they
>> still occasionally still swap..
>> My question is would someone take a look at these rules and see if there is
>> something obvious I am missing..
>>
>> KERNEL=="video*", ATTR{name}=="ivtv0 encoder MPG", ATTRS{vendor}=="0x4444",
>> SYMLINK+="video_PVR150"
>>
>> KERNEL=="video*", ATTR{name}=="Hauppauge HD PVR", ATTRS{vendor}=="0x8086",
>> SYMLINK+="video_hdpvr"
>>
>>     
>
> Even with those rules, are you still trying to use /dev/video0 and
> /dev/video1 in Myth?  If so, that is your problem.  Using the rules
> you have defined there, use /dev/video_PVR150 and /dev/video_hdpvr in
> Myth.
>
> John
>   
Thanks for that John..I tried what you said wrote (I also read that 
solution when researching this problem),but each time I type in  
/dev/video_PVR150 it reverts back to /dev/video1...

Back to the drawing board..