[mythtv-users] VLC Tests

[Nick Rout]

On Fri, Aug 27, 2010 at 4:19 AM, mike at grounded.net <mike at grounded.net> wrote:
> I was able to cut this information. I know this tells it all but being new to myth, I'm not sure which error is the relevant one.
>
> [mythtv at my10 root]$ vlc /dev/video0
> VLC media player 1.0.6 Goldeneye
> [0x121d348] inhibit interface error: Failed to connect to the D-Bus session daemon: Did not receive a reply. Possible causes include: the re
> mote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connecti
> on was broken.
> [0x121d348] main interface error: no suitable interface module
> [0x10e6098] main libvlc error: interface "inhibit,none" initialization failed
> No protocol specified
> [0x11f69f8] main interface error: no suitable interface module
> [0x10e6098] main libvlc error: interface "globalhotkeys,none" initialization failed
> [0x10e6098] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
> No protocol specified
> [0x11f69f8] qt4 interface error: Could not connect to X server
> No protocol specified
> [0x11f69f8] skins2 interface error: Cannot open display
> [0x11f69f8] skins2 interface error: cannot initialize OSFactory
> Remote control interface initialized. Type `help' for help.
> libdvdnav: Using dvdnav version 4.1.4
> libdvdread: Using libdvdcss version 1.2.10 for DVD access
> libdvdnav: Can't seek to block 32
> libdvdnav: Unable to find map file '/home/mythtv/.dvdnav/.map'
> libdvdread: Can't seek to block 256
> libdvdnav:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.IFO failed
> libdvdread: Can't seek to block 256
> libdvdnav:DVDOpenFileUDF:UDFFindFile /VIDEO_TS/VIDEO_TS.BUP failed
> libdvdread: Can't open file VIDEO_TS.IFO.
> libdvdnav: vm: failed to read VIDEO_TS.IFO
> [0x7f5968006568] vcd access error: could not read TOCHDR
> [0x7f5968006568] vcd access error: no movie tracks found
> No protocol specified
> [0x7f5960000978] xvideo video output error: cannot open display :2.0

what is your setup here: you appear to have more than one X display as
the first is usually :0, so :2 would be the third X display which is a
little weird.