[mythtv-users] Mystique SaTiX-S2 Dual PCIe (stv0900 + stv6110)
Andre
mythtv-list at dinkum.org.uk
Mon Apr 12 14:31:29 UTC 2010
On 3 Apr 2010, at 11:26, Andre wrote:
>
> On 8 Mar 2010, at 02:29, David Kubicek wrote:
>
>> Hello,
>>
>> does anybody have these dual cards? I've read about some interference and weak signal issues. How's the Linux support looking up? All features supported, signal stats working?
>
> I got a Satix-S2 V2 card earlier in the week and I've been testing it with various Linux software, It's now in my main MythTV system and working well.
>
> The driver needs a 2.6.31 kernel, I've used it with 2.6.31-20 and 2.6.33 on Ubuntu 9.10, I found I needed to build the latest (this week) v4l-dvb drivers to have the card recognised but looking in lspci I see the card id is 18c3:db02 not 18c3:db01 so maybe this is added just recently, there is a firmware required too, I just followed the instructions here:
> http://www.linuxtv.org/wiki/index.php/Mystique_SaTiX-S2_Dual
>
> The card appears as /dev/dvb/adaptor0/ with frontend 0 & 1 like a HVR-4000 but difference is you can use frontend0 & frontend1 at the same time. MythTV identified both frontends and worked fine with DVBS & S2 no problems, I set a tuning delay of 500ms based on some linux-media posts I read but I don't think it is needed as the tuner tunes must faster than the HVR-4000. I was able to record 6 HD shows across the two tuners with some small glitches as the recordings start but clean after a second or two, very nice :-)
>
> I found a useful module option that makes two separate adaptor devices instead of one, I was testing with TV Headend and it doesn't recognise /frontend1 :-( so: "options ngene one_adapter=0" makes it create two separate devices, might be useful to know.
>
> Only been running two days in MythTV but no lost recordings and no glitching (that I've noticed) yet, so far it works better than my HVR-4000 and HD-S2 which glitch once or twice in a 1 hour show. Didn't have to re-scan, picked up and worked with my HVR-4000 source for all channels. I do have a very strong sat signal so don't know about sensitivity or reliability with a weaker signal.
Further Satix S2 V2 Dual update:
Working very well, very very occasional glitch when recording > 4 HD programmes across both tuners, multirec overlaps etc. otherwise reliable and giving better results than my HVR-4000. About to be promoted up the capture card list above the HVR-4000.
Andre
More information about the mythtv-users
mailing list