[mythtv-users] Virgin1 moving to virgin1+1

[Another Sillyname]

2009/5/23 John Williamson <tyringham at gmail.com>:
>
>> However it is detected by all the other TVs in the house. When I scan I
>> am doing a Full scan.
>>
>> Have just deleted the 2 channels and rescanned. Now have virgin1+1 with
>> data from 6pm to 12pm. However when I try to watch it, it displays as
>> Virgin1 with a message to retune after 20/5/09 for Virgin1 all day. My
>> details below.
>>
>> Setup extract from lshw
>>
>>  description: Motherboard
>>        product: P5N7A-VM
>>        vendor: ASUSTeK Computer INC.
>>        physical id: 0
>>        version: Rev 1.xx
>>   driver=pcieport-driver
>>            *-multimedia
>>                 description: Multimedia video controller
>>                 product: CX23885 PCI Video and Audio Decoder
>>                 vendor: Conexant Systems, Inc.
>>                 physical id: 0
>>                 bus info: pci at 0000:02:00.0
>>                 version: 02
>>                 width: 64 bits
>>                 clock: 33MHz
>>                 capabilities: pciexpress pm vpd msi bus_master cap_list
>>                 configuration: driver=cx23885 latency=0 module=cx23885
>>         *-pci:2
>>              description: PCI bridge
>>              product: MCP79 PCI Express Bridge
>>              vendor: nVidia Corporation
>>              physical id: 10
>>              bus info: pci at 0000:00:10.0
>>              version: b1
>>              width: 32 bits
>>              clock: 33MHz
>>              capabilities: pci pm msi bus_master cap_list
>>            *-display
>>                 description: VGA compatible controller
>>                 product: GeForce 9300 / nForce 730i
>>                 vendor: nVidia Corporation
>>                 physical id: 0
>>                 bus info: pci at 0000:03:00.0
>>                 version: b1
>>                 width: 64 bits
>>                 clock: 33MHz
>>                 capabilities: pm msi bus_master cap_list
>>                 configuration: driver=nvidia latency=0 module=nvidia
>>
>> 1 PCI                 Hauppauge Nova T 500 dual Tuner
>>
>> 1 USB                 Hauppauge USB nova T stick Tuner
>>
>> 2 x           Hauppauge HVR 1700 PCIe Tuners
>>
>> Connects via HDMI to HDTV
>>
>> Nearest transmitter - Belmont - not sure where to find QAM data on
>> system
>>
>>
>> John
>>
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users at mythtv.org
>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
> Forgot to add - using Mythbuntu 8.10
>
>
> John
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>

OK So it's a combined FE/BE?

It sounds to me like the channel isn't getting deleted properly before
the rescan....

Try this please (take offline any other FE's before doing this).

Go into mythweb (I'm assuming your running it?  If not I'll come up
with a different plan!!)

In mythweb --> Choose mythtv (on the top banner menu, extreme left)
--> Settings --> Channel Info

you should now get a detailed line option for each channel

delete is the selection button on the extreme left of each line

(On a separate note you can change channel numbers and whether they're
visible or not in here very easily - I've removed ALL the garbage
channels and renumbered quite a few.....but for now just delete the
Virgin ones, Fiver and Five US).

Delete all the channels you want to rescan.

When done click the Save button at the very bottom of the page - Then
wait for the page to refresh (that's when the mysql db has been
updated)

In a terminal session as the default user who set the system up run
mythfilldatabase......wait for this to finish

in a root terminal session stop the mythbackend service

In the terminal session as the default user who set up the system run
the setup program (it's mythtv-setup on mine....may be slightly
different on yours)

Go into Channel Editor

Go Into Channel Scanner

Rescan the Existing Transports

Wait for it to finish.......and then exit

In the terminal session as root start the mythbackend service

In the terminal session as the default user run
mythfilldatabase.....wait for it to finish

Then Report Back Please