[mythtv-users] Virgin1 moving to virgin1+1
John Williamson
tyringham at gmail.com
Sat May 23 15:25:55 UTC 2009
On Sat, 2009-05-23 at 13:05 +0100, Another Sillyname wrote:
> 2009/5/23 John Williamson <tyringham at gmail.com>:
> >> >
> >> > In summary Virgin1 has channel data but no signal. Virgin1+1 has the
> >> > signal but no channel data, but the signal is 1 hour behind the data
> >> > displayed for virgin1.
> >> >
> >> > I have tried swapping the channel Ids in setup but that just reversed
> >> > the current situation. All my TVs etc have retuned fine, this is just a
> >> > mythbox problem.
> >> >
> >> > Any ideas?
> >> >
> >> >
> >> >
> >> > Thanks
> >
> >> delete the 2 channels (using mythweb) then retune
> >
> >
> >> _______________________________________________
> >> mythtv-users mailing list
> >> mythtv-users at mythtv.org
> >> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
> > Thanks, I have done that but nothing was detected. I have manually
> > installed Virgin 1 with XMLTVID '1.virginmedia.com' to channel 20 and
> > Virgin 1+1 with XMLTVID tsod.plus-1.freeview.1.virginmedia.com which I
> > found at http://www.nabble.com/How-do-I-setup-Virgin1%
> > 2B1-With-Limit-Hours-Of-18%3A00-06%3A00-(RT-UK-grabber)--td23640330.html
> >
> > So far there is no data on Virgin1 and only data from 6pm-12pm on 1+1.
> > Retuning a station should not be this difficult.
> >
> > Do I wait for mythfilldatabase to gradually populate the listings or is
> > there an error
> >
> > thanks
> >
> >
> > John
> >
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
>
> Eh?
>
> The channel is not detected on a scan?
>
> I suspect there's your problem.
>
> When you do the new scan are you scanning existing transports?
>
> Can you give some info regarding your setup
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
However it is detected by all the other TVs in the house. When I scan I
am doing a Full scan.
Have just deleted the 2 channels and rescanned. Now have virgin1+1 with
data from 6pm to 12pm. However when I try to watch it, it displays as
Virgin1 with a message to retune after 20/5/09 for Virgin1 all day. My
details below.
Setup extract from lshw
description: Motherboard
product: P5N7A-VM
vendor: ASUSTeK Computer INC.
physical id: 0
version: Rev 1.xx
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 0504 (01/22/2009)
size: 64KiB
*-cpu
description: CPU
product: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu at 0
version: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz
serial: To Be Filled By O.E.M.
slot: Socket 775
2Gb Ram
*-pci
description: Host bridge
product: MCP79 Host Bridge
vendor: nVidia Corporation
physical id: 100
*-multimedia
description: Audio device
product: MCP79 High Definition Audio
vendor: nVidia Corporation
physical id: 8
bus info: pci at 0000:00:08.0
version: b1
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list
configuration: driver=HDA Intel latency=0 maxlatency=5
mingnt=2 module=snd_hda_intel
*-disk
description: ATA Disk
product: SAMSUNG HD103UJ
physical id: 0
bus info: scsi at 0:0.0.0
logical name: /dev/sda
version: 1AA0
size: 931GiB (1TB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=000d51a9
*-volume:0
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: scsi at 0:0.0.0,1
logical name: /dev/sda1
*-pci:1
description: PCI bridge
product: MCP79 PCI Express Bridge
vendor: nVidia Corporation
physical id: c
bus info: pci at 0000:00:0c.0
version: b1
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress bus_master cap_list
configuration: driver=pcieport-driver
*-multimedia
description: Multimedia video controller
product: CX23885 PCI Video and Audio Decoder
vendor: Conexant Systems, Inc.
physical id: 0
bus info: pci at 0000:02:00.0
version: 02
width: 64 bits
clock: 33MHz
capabilities: pciexpress pm vpd msi bus_master cap_list
configuration: driver=cx23885 latency=0 module=cx23885
*-pci:2
description: PCI bridge
product: MCP79 PCI Express Bridge
vendor: nVidia Corporation
physical id: 10
bus info: pci at 0000:00:10.0
version: b1
width: 32 bits
clock: 33MHz
capabilities: pci pm msi bus_master cap_list
*-display
description: VGA compatible controller
product: GeForce 9300 / nForce 730i
vendor: nVidia Corporation
physical id: 0
bus info: pci at 0000:03:00.0
version: b1
width: 64 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list
configuration: driver=nvidia latency=0 module=nvidia
1 PCI Hauppauge Nova T 500 dual Tuner
1 USB Hauppauge USB nova T stick Tuner
2 x Hauppauge HVR 1700 PCIe Tuners
Connects via HDMI to HDTV
Nearest transmitter - Belmont - not sure where to find QAM data on
system
John
More information about the mythtv-users
mailing list