[mythtv-users] HVR-1600 scan (Digital) can't find any channels

[stefan_jones at comcast.net]

When the card is scanning, do you see any signal strength bars? 

Hmmm. Try one of the non-mythtv scan utilities. Go to the Mythtv wiki and look up the adding digital channels page. I just used that to sort through the dozens of digital channels that were recently added. 

I think the package I installed was dvbscan . . . try 'yum list dvb*' 



----- Original Message ----- 
From: "Bryan Cromwell" <bcromwell.mailinglists at gmail.com> 
To: mythtv-users at mythtv.org 
Sent: Sunday, March 1, 2009 8:04:10 AM GMT -08:00 US/Canada Pacific 
Subject: [mythtv-users] HVR-1600 scan (Digital) can't find any channels 

Have comcast in atlanta, I can get several digital channels on my plasma so I know they are out there. I can see all analog channels find but when I scan for digital (qam-256) I don't find anything at all. Am I missing something? I have tried virtually every combination in the scan screen (cable,hrc,irc,256,126,64). 

2.6.27.9-159.fc10.i686 

cx18: Start initialization, version 1.1.0 
cx18-0: Initializing card 0 
cx18-0: Autodetected Hauppauge card 
cx18 0000:02:09.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 
cx18-0: Unreasonably low latency timer, setting to 64 (was 32) 
cx18-0: cx23418 revision 01010000 (B) 
cx18-0: Autodetected Hauppauge HVR-1600 
cx18-0: Simultaneous Digital and Analog TV capture supported 
tuner 2-0043: chip found @ 0x86 (cx18 i2c driver #0-1) 
tuner 2-0061: chip found @ 0xc2 (cx18 i2c driver #0-1) 
cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0) 
cx18-0: Registered device video0 for encoder MPEG (64 x 32 kB) 
DVB: registering new adapter (cx18) 
cx18-0: DVB Frontend registered 
cx18-0: Registered DVB adapter0 for TS (32 x 32 kB) 
cx18-0: Registered device video32 for encoder YUV (16 x 128 kB) 
cx18-0: Registered device vbi0 for encoder VBI (20 x 51984 bytes) 
cx18-0: Registered device video24 for encoder PCM audio (256 x 4 kB) 
cx18-0: Registered device radio0 for encoder radio 
cx18-0: Initialized card: Hauppauge HVR-1600 
cx18: End initialization 
cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes) 
cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes) 
cx18-0: FW version: 0.0.74.0 (Release 2007/03/12) 
cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes) 


_______________________________________________ mythtv-users mailing list mythtv-users at mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mythtv.org/pipermail/mythtv-users/attachments/20090302/d902cd24/attachment.htm>