[mythtv-users] HDMI issues
Seth Art
sethsec at gmail.com
Tue Aug 18 02:08:10 UTC 2009
Thanks for the reply Allen! Unfortunately that didn't work. Any
other ideas? Anyone else?
Are there any tools I can use to help me diagnose this "flicker" that
occurs on the TV, but not the monitor?
-Seth
On Sun, Aug 16, 2009 at 10:27 AM, Allen
Edwards<allen.p.edwards at gmail.com> wrote:
>
>
> On Sat, Aug 15, 2009 at 10:00 PM, Seth Art <sethsec at gmail.com> wrote:
>>
>> Hey all,
>>
>> I have a problem that is not really related to MythTV, but I don't
>> even know where to start troubleshooting. If anyone can point me in
>> the right direction, or point me to the right tools, I would certainly
>> appreciate it.
>>
>> Details:
>> TV: Sony Bravia KDL-40v4100
>> Video Card: Nvideo 5200 (DVI, VGA, S-Video out)
>> Cable: DVI to HDMI cable
>> OS: Latest MythDora (10.21)
>>
>> Problem: I recently purchased a new TV (above), and a new DVI (video
>> card) to HDMI (TV) cable. The problem is that when using this cable
>> the screen "flickers" black for about 1-2 seconds every 2-5 minutes.
>>
>> It seems to only do this when playing video, or viewing pictures in
>> slideshow mode. I know it is not a MythTV issue, because I tried
>> playing a video with both Totem and Xine in standalone mode, and not
>> even full screen and the same problem occurs. Interestingly even when
>> the video is playing on a quater of the screen, the entire screen goes
>> "blank/black" for that second or two.
>>
>> Troubleshooting: I hooked up my 24 inch BENQ HDMI monitor and played
>> the video for a good 10 minutes without any flickers. That certainly
>> seems to rule out the cable and the video card, doesn't it?
>>
>> To me it seems that all that is left is: the Sony TV (please, no!) or
>> a X config issue.
>>
>> I tailed /var/log/messages, /var/log/Xorg.0.log, and even
>> /var/log/mythtv/mythfrontend.log to see if any messages popped up
>> right at the flicker point, but nope.
>>
>> I even tried to create a custom modeline. I cant remember the tool I
>> used to create the modeline (not in my history unfortunately), but
>> here it is, with the rest of my monitor section of the xorg.conf:
>>
>> Section "Monitor"
>> Identifier "Monitor0"
>> VendorName "Unknown"
>> ModelName "Unknown"
>> HorizSync 28.0 - 33.0
>> VertRefresh 43.0 - 72.0
>> Option "DPMS"
>> # 1920x1080 @ 60.00 Hz (GTF) hsync: 67.08 kHz; pclk: 172.80 MHz
>> Modeline "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081
>> 1084 1118 -HSync +Vsync
>> EndSection
>>
>> Does anyone have any ideas? Where should I start troubleshooting?
>> Has anyone seen something similar? Do you need more info?
>>
>> I should also note that when I use a VGA (video card) to VGA (TV)
>> there is no flicker at all. The main drawback is that the picture is
>> noticeably less vibrant and less sharp.
>>
>> Thanks!
>>
>> Seth
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users at mythtv.org
>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
> My suggestion is to take out as much of your xorg as possible and just let
> the box figure it out. Don't be so helpful in telling it settings. For
> example, here is my monitor section:
> Section "Monitor"
> Identifier "MythMonitor"
> Option "DPMS"
> EndSection
>
> Allen
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
More information about the mythtv-users
mailing list