[mythtv-users] Trunk and Multiple HDPVR Tuners
Marshall McMullen
marshall.mcmullen at gmail.com
Thu Aug 6 16:58:32 UTC 2009
----- "Marshall McMullen" <marshall.mcmullen at gmail.com> wrote:
> So I'm guessing that the older model is not working... Does anyone
> have this older model HDPVR working ?
I'll have to try upgrading the firmware on this older model as I'm sure that's important... One more piece of info I noticed is that the backend reports in the log very different output on the two tuners. On the one that works:
WORKS::
2009-08-06 10:13:43.691 Program Map Table ver(0) pid(0x100) pnum(1) len(59)
Registration Descriptor: 'HDMV' Blu-Ray A/V for read-only media (H.264 TS)
Unknown(136) Descriptor (0x88) length(4)
Stream #0 pid(0x1011) type(video-h264 0x1b)
Registration Descriptor: 'HDMV' Blu-Ray A/V for read-only media (H.264 TS)
Stream #1 pid(0x1100) type(audio-ac3 0x81)
Registration Descriptor: 'AC-3' ATSC audio stream A/52
Audio Stream Descriptor full_srv(1) sample_rate(48kbps) bit_rate(=384kbps, 14)
bsid(8) bs_mode(0) channels(3/2) Dolby(Not indicated)
mainID(0)
FAILS::
2009-08-06 10:09:17.511 PMT in input stream
2009-08-06 10:09:17.524 Program Map Table ver(0) pid(0x100) pnum(1) len(53)
Registration Descriptor: 'HDMV' Blu-Ray A/V for read-only media (H.264 TS)
Unknown(136) Descriptor (0x88) length(4)
Stream #0 pid(0x1011) type(video-h264 0x1b)
Registration Descriptor: 'HDMV' Blu-Ray A/V for read-only media (H.264 TS)
Stream #1 pid(0x1100) type(audio-aac 0xf)
So it seems that would be the cause of the failure here. Hopefully a firmware upgrade will help. I'll try it tonight when I get home and report back in case this helps others.
More information about the mythtv-users
mailing list