[mythtv-users] LIRC in Mythbuntu 8.04.1 (now 8.10!!!!)
Harry Devine
lifter89 at comcast.net
Tue Nov 4 15:18:28 UTC 2008
steve.goodey at bt.com wrote:
> No, I think you are correct that com1 is 03f8.
>
> Do you remember modifying a file hardware.conf on the previous version
> of Mythbuntu when you got the remote to work?
>
> Steve
>
>
>> -----Original Message-----
>> From: Harry Devine [mailto:lifter89 at comcast.net]
>> Sent: 04 November 2008 13:40
>> To: Goodey,SJ,Steve,ASAC6N R
>> Cc: Discussion about mythtv
>> Subject: Re: [mythtv-users] LIRC in Mythbuntu 8.04.1 (now 8.10!!!!)
>>
>> steve.goodey at bt.com wrote:
>>
>>>
>>>
>>>
>>>> I'm pretty certain that I didn't make any typos (well, I
>>>>
>> did at first
>>
>>>> but corrected it). Here's what I did:
>>>> 1) setup a custom remote in MCC
>>>> 2) copied my lircd.conf for my remote to /etc/lirc and
>>>>
>> made it root
>>
>>>> owner and root group
>>>> 3) copied my lircrc to /home/hdevine/.lirc, renamed it to
>>>>
>> mythtv and
>>
>>>> gave it hdevine owner and hdevine group
>>>> 4) added modprobe lirc_serial to /etc/init.d/bootmisc.sh
>>>> 5) ran the dpkg-reconfigure setserial command and chose manual
>>>> 6) modified /var/lib/setserial/autoserial.conf by adding
>>>>
>> "setserial
>>
>>>> /dev/ttyS0 uart none"
>>>> 7) copied the autoserial.conf to /etc/serial.conf
>>>> 8) rebooted
>>>>
>>>> Just to be clear, I originally had "/dev/tty/S0 uart none" in
>>>> autoserial.conf and that didn't work. I realized that it
>>>>
>> needed to
>>
>>>> be /dev/ttys0 instead so I tried that and got nothing.
>>>>
>> Then, based
>>
>>>> on the /var/log/messages error, I changed it to "setserial
>>>>
>> /dev/ttys0
>>
>>>> uart none" as it is now.
>>>>
>>>> Hopefully someone has some idea what I'm missing. Thanks
>>>>
>> again for
>>
>>>> the help!
>>>> Harry
>>>>
>>>>
>>>>
>>>>
>>> Harry,
>>> How about looking in dmesg, any other info/error messages there?
>>> Something about port already in use?
>>>
>>> Steve.
>>>
>>>
>>>
>> dmesg shows the following:
>>
>> [ 18.409777] lirc_dev: IR Remote Control driver registered, major 61
>> [ 18.414347] lirc_serial: port 03f8 already in use
>> [ 18.414350] lirc_serial: use 'setserial /dev/ttySX uart none'
>> [ 18.414351] lirc_serial: or compile the serial port driver
>> as module and
>> [ 18.414353] lirc_serial: make sure this module is loaded first
>>
>> I thought that 03f8 was com1, which is where it's plugged
>> into. I never moved it when I reinstalled the OS. Should I
>> change /dev/ttyS0 to ttyS1?
>>
>> Thanks,
>> Harry
>>
>>
>>
>
>
Nope, never had to touch that file. I see that it exists in /etc/lirc,
but based on its contents, I don't think I have to touch it. It doesn't
mention anything in there about ports, etc.
Haryr
More information about the mythtv-users
mailing list