[mythtv-users] Only one tuner works on dual tuner PVR-500 card.

Popatopalous popatopalous at comcast.net
Thu Jan 17 23:59:13 UTC 2008


Only one tuner works on dual tuner PVR-500 card. Card has worked
properly in Mythtv in other distros.

Mandriva 2.6.22.12-desktop-1mdv 2008.0 x86_64
Hauppage PVR-500
Mythtv version 0.20.2-14486.1plf2008.0 at x86_64
ASUS-MN2NPV-VM mobo with on board
nVidia Corporation C51PV [GeForce 6150] (rev a2)
nVidia Corporation MCP51 High Definition Audio (rev a2)
Multimedia video controller: Internext Compression Inc iTVC16 (CX23416)
MPEG-2 Encoder (rev 01)
Multimedia video controller: Internext Compression Inc iTVC16 (CX23416)
MPEG-2 Encoder (rev 01)
x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+
4GB Corsair CM2X1024-6400PRO DDR at -800 RAM

$ dmesg | egrep -i '(ivtv|tveeprom|tuner)'
ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 1.0.0 (2.6.22.12-desktop-1mdv SMP mod_unload ) loading
ivtv0: Autodetected Hauppauge card (cx23416 based)
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Recommended firmware version is 0x02060039.
tveeprom 2-0050: Hauppauge model 23552, rev E592, serial# 8363378
tveeprom 2-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx
101, type 62)
tveeprom 2-0050: audio processor is CX25843 (idx 37)
tveeprom 2-0050: decoder processor is CX25843 (idx 30)
tveeprom 2-0050: has radio, has no IR receiver, has no IR transmitter
ivtv0: Autodetected WinTV PVR 500 (unit #1)
tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 2-0060: TEA5767 detected.
tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #0)
tuner 2-0060: type set to 62 (Philips TEA5767HN FM Radio)
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0)
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
tuner 2-0061: type set to 57 (Philips FQ1236A MK4)
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
ivtv:  ======================  NEXT CARD  ======================
ivtv1: Autodetected Hauppauge card (cx23416 based)
ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv1: Encoder revision: 0x02050032
ivtv1: Recommended firmware version is 0x02060039.
tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #1)
tda9887 3-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1)
wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1)
tveeprom 3-0050: Hauppauge model 23552, rev E592, serial# 8363378
tveeprom 3-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx
101, type 62)
tveeprom 3-0050: audio processor is CX25843 (idx 37)
tveeprom 3-0050: decoder processor is CX25843 (idx 30)
tveeprom 3-0050: has radio, has no IR receiver, has no IR transmitter
ivtv1: Correcting tveeprom data: no radio present on second unit
ivtv1: Autodetected WinTV PVR 500 (unit #2)
tuner 3-0061: type set to 57 (Philips FQ1236A MK4)
ivtv1: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c!
ivtv1: i2c addr 0x44 not found for command 0x4008646f!
ivtv1: i2c hardware 0x00000001 (cx2584x) not found for command 0x4008646d!
ivtv1: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c!
ivtv1: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c!
ivtv1: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c!
ivtv1: Registered device video1 for encoder MPEG (4 MB)
ivtv1: Registered device video33 for encoder YUV (2 MB)
ivtv1: Registered device vbi1 for encoder VBI (1 MB)
ivtv1: Registered device video25 for encoder PCM audio (1 MB)
ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
ivtv:  ====================  END INIT IVTV  ====================
ivtv1: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c!
ivtv1: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c!
ivtv1: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c!
ivtv1: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c!

/dev/v4l/video1 works. How do I get /dev/v4l/video0 to work?
Let me know of any info or logs needed.

-- 
Sincerely,
Ben Popatopalous





More information about the mythtv-users mailing list