[mythtv-users] Asus M2NPV-VM F8 Suspend

Mitch Gore mitchell.gore at gmail.com
Thu Jan 17 16:15:58 UTC 2008


On Jan 17, 2008 7:07 AM, Ma Begaj <derliebegott at gmail.com> wrote:

> 2008/1/17, Mitch Gore <mitchell.gore at gmail.com>:
> > This is a continuation of the thread
> > ASUS M2NPV-VM or GIGABYTE GA-M68SM-S2
> > http://www.gossamer-threads.com/lists/mythtv/users/309798
> > I am renaming it to keep the subject in sync with the topic
> >
> > ##############################################################
> >
> >  Ok, So here is where I stand now.
> >
> > The goals:
> >
> > Get suspend to work on my BE/FE box
> > have power via remote.
> > Have power via remote frontend work.
> >
> > Box is a Asus M2NPV-VM
> > AMD X2 5200
> > 1 Gig of RAM
> > PVR 150
> > 2 Sata drives
> > HDHomeRun
> > MCE USB remote /w lirc
> >
> > Where i stand now:
> >
> > To put box in suspend I must unload IVTV then reload after after resume.
> > 'rmmod ivtv' 'modprobe ivtv'
> > To get power via remote I moved jumpers on Motherboard. and 'echo USB0 >
> > /proc/acpi/wakeup'
> > To suspend I do a 'echo mem > /sys/power/state
> > To wake push power button or remotes power button.
> >
> > What I need to fix:
> > X does not reload on resume.  I am running the latest nVidia 169.07drivers
> > using the onboard 6150 graphics.
> >
> > Beyond that the box works perfectly.  Once i resume i can ssh to the box
> and
> > see mythbackend is running and I can hit it with Mythweb.  Also my
> > recordings will work just find.  I just don't get a GUI.
> >
> > So anyone out there have this issue and find a resolution?
> >
>
> Try using "s2ram" instead of "echo mem >/sys/power/state". s2ram has
> some built in support for saving gui before suspend.
>
> But on the other side ... it should work without s2ram as it works for
> me and paul and a few others. Maybe you are missing a module in
> xorg.conf. Can you post the modules section from the xorg config file.
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>


Sure..

[myth at mythtv ~]$ cat /etc/X11/xorg.conf

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister at builder26)  Wed Jun 13
16:54:50 PDT 2007
# Xorg configuration created by pyxf86config

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen      0  "Screen0" 1920 0
        Screen      1  "Screen1" LeftOf "Screen0"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

#    FontPath     "unix/:7100"
        ModulePath   "/usr/lib64/xorg/modules/extensions/nvidia"
        ModulePath   "/usr/lib64/xorg/modules/extensions"
        ModulePath   "/usr/lib64/xorg/modules"
EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "fbdevhw"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
        Load  "v4l"
EndSection

Section "ServerFlags"
        Option      "Xinerama" "0"
        Option      "AIGLX" "on"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "us+inet"
        Option      "swcursor"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Unknown"
        ModelName    "Envision EN5400"
        HorizSync    30.0 - 63.0
        VertRefresh  50.0 - 76.0
EndSection

Section "Monitor"
        Identifier   "Monitor1"
        VendorName   "Unknown"
        ModelName    "OPTi Optoma HD80"
        HorizSync    15.0 - 120.0
        VertRefresh  15.0 - 99.0
EndSection

Section "Device"
        Identifier  "Videocard0"
        Driver      "nvidia"
        VendorName  "NVIDIA Corporation"
        BoardName   "Quadro NVS 210S / NVIDIA GeForce 6150LE"
        Option      "HWCursor" "off"
        Option      "AIGLX" "on"
        Option      "NoLogo" "true"
        Option      "NvAGP" "1"
        BusID       "PCI:0:5:0"
EndSection

Section "Device"
        Identifier  "Videocard1"
        Driver      "nvidia"
        VendorName  "NVIDIA Corporation"
        BoardName   "Quadro NVS 210S / NVIDIA GeForce 6150LE"
        Option      "NoLogo" "true"
        Option      "AIGLX" "on"
        BusID       "PCI:0:5:0"
        Screen      1
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth     24
        Option      "TwinView" "0"
        Option      "metamodes" "CRT: nvidia-auto-select +0+0"
        SubSection "Display"
                Depth     24
                Modes    "1600x1200" "1280x1024" "1024x768" "800x600"
"640x480"
        EndSubSection
EndSection

Section "Screen"
        Identifier "Screen1"
        Device     "Videocard1"
        Monitor    "Monitor1"
        DefaultDepth     24
        Option      "TwinView" "0"
        Option      "metamodes" "DFP: nvidia-auto-select +0+0"
        Option      "AddARGBGLXVisuals" "True"
EndSection

Section "Extensions"
        Option      "Composite" "Enable"
EndSection


With s2ram...I cant find a package named that.  There is tuxonice which when
I used that it was actually worse.
Do i need to use any quirks.. using the command pm-suspend does the same
bahavior as echo mem > /sys/power/state but I also see options...

[myth at mythtv ~]$ pm-suspend --help
pm-action [options]

Options can change how the supend or hibernate is done.

Possible actions are:

  --quirk-dpms-on
  --quirk-dpms-suspend
  --quirk-radeon-off
  --quirk-reset-brightness
  --quirk-s3-bios
  --quirk-s3-mode
  --quirk-vbe-post
  --quirk-vbemode-restore
  --quirk-vbestate-restore
  --quirk-vga-mode3

[myth at mythtv ~]$

Thanks,
Mitchell
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20080117/77e66f47/attachment.htm 


More information about the mythtv-users mailing list