[mythtv-users] KWorld ATSC-115 problems -- can't change channel, no sound

[John Drescher]

On Wed, Dec 31, 2008 at 3:43 PM, David Lonie <loniedavid at gmail.com> wrote:
> Trying out the digital portion:
>
> I've tried using both versions of the firmware (linuxtv and the one
> from John), and under both, dvbsnoop fails when getting parameters for
> the card (below). Any ideas what this could mean?
>
> # dvbsnoop -s feinfo
> dvbsnoop V1.4.50 -- http://dvbsnoop.sourceforge.net/
>
> ---------------------------------------------------------
> FrontEnd Info...
> ---------------------------------------------------------
>
> Device: /dev/dvb/adapter0/frontend0
>
> Basic capabilities:
>    Name: "Nextwave NXT200X VSB/QAM frontend"
>    Frontend-type:       unkonwn
>    Frequency (min):     54000.000
>    Frequency (max):     860000.000
>    Frequency stepsiz:   166.666
>    Frequency tolerance: 0.000
>    Symbol rate (min):     0.000000 MSym/s
>    Symbol rate (max):     0.000000 MSym/s
>    Symbol rate tolerance: 0 ppm
>    Notifier delay: 0 ms
>    Frontend capabilities:
>        auto inversion
>        FEC 1/2
>        FEC 2/3
>        FEC 3/4
>        FEC 5/6
>        FEC 7/8
>        FEC AUTO
>        QAM 64
>        QAM 256
>
> Current parameters:
> Error(95): frontend ioctl: Operation not supported
> _______________________________________________

Same here but digital works

metro # dvbsnoop -s feinfo
dvbsnoop V1.4.50 -- http://dvbsnoop.sourceforge.net/

---------------------------------------------------------
FrontEnd Info...
---------------------------------------------------------

Device: /dev/dvb/adapter0/frontend0

Basic capabilities:
    Name: "Nextwave NXT200X VSB/QAM frontend"
    Frontend-type:       unkonwn
    Frequency (min):     54000.000
    Frequency (max):     860000.000
    Frequency stepsiz:   166.666
    Frequency tolerance: 0.000
    Symbol rate (min):     0.000000 MSym/s
    Symbol rate (max):     0.000000 MSym/s
    Symbol rate tolerance: 0 ppm
    Notifier delay: 0 ms
    Frontend capabilities:
        auto inversion
        FEC 1/2
        FEC 2/3
        FEC 3/4
        FEC 5/6
        FEC 7/8
        FEC AUTO
        QAM 64
        QAM 256

Current parameters:
Error(95): frontend ioctl: Operation not supported

John