[mythtv-users] Recording slows down IR remote

[Bill Omer]

On 9/14/07, Tony Baca <cfr131 at gmail.com> wrote:
>
>
> My remote (homebrew serial) worked without a problem under 0.20-148.  When I
> had to upgrade to 20.2 for SD, I also upgraded from MythDora 3.2 to 4.0.
> Now the IR remote is intermittent.  While the machine is recording via
> PVR150, if I press the remote, I can see LIRCD move up the list in TOP.
> MYTH will receive an IR command once every 5-6 seconds.  As soon as the
> recording is finished, the remote works fine.
>
>
>
> lircd-0.8.2-CVS[7688]
>
>
>
> /etc/rc.d/rc.local:
>
> setserial /dev/ttyS0 uart none #ttyS0=com1 ttyS1=com2
>
> /sbin/modprobe lirc_serial
>
> sleep 2
>
> lircd --device=/dev/lirc0 --output=/dev/lircd --logfile=/var/log/lircd
>
>
>
> /etc/modprobe.conf:
>
> #LIRC IRBlaster
>
> alias char-major-61-0 lirc_serial
>
> options lirc_serial irq=4 io=0x3f8
>
> #options lirc_serial irq=3 io=0x2f8
>
> install lirc_serial /bin/setserial /dev/ttyS0 uart none; /sbin/modprobe
> --ignore-install lirc_serial
>
>
>
>
>
>  I just enabled LIRCD to log to the log file, so I don't have anything there
> yet.
>
>
>
> Not sure where to look. I tried the MythDora forum already
>


Could it possibly be an irq conflict?


-- 
Regards,
Bill Omer