[mythtv-users] no sound

Micheal Drew blackprince26 at gmail.com
Mon Nov 12 22:00:38 UTC 2007


here you gp:

[    0.000000] Linux version 2.6.22-14-generic (buildd at palmer) (gcc
version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP
Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] 127MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f4810
[    0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   262128
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   262128
[    0.000000] On node 0 totalpages: 262128
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 255 pages used for memmap
[    0.000000]   HighMem zone: 32497 pages, LIFO batch:7
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F61C0 checksum 0
[    0.000000] ACPI: RSDP 000F61C0, 0014 (r0 GBT   )
[    0.000000] ACPI: RSDT 3FFF3000, 0034 (r1 GBT    NVDAACPI 42302E31
NVDA  1010101)
[    0.000000] ACPI: FACP 3FFF3040, 0074 (r1 GBT    NVDAACPI 42302E31
NVDA  1010101)
[    0.000000] ACPI: DSDT 3FFF30C0, 4463 (r1 GBT    NVDAACPI     1000
MSFT  100000C)
[    0.000000] ACPI: FACS 3FFF0000, 0040
[    0.000000] ACPI: SSDT 3FFF75C0, 00D3 (r1 PTLTD  POWERNOW        1
LTP        1)
[    0.000000] ACPI: MCFG 3FFF76C0, 003C (r1 GBT    NVDAACPI 42302E31
NVDA  1010101)
[    0.000000] ACPI: APIC 3FFF7540, 0072 (r1 GBT    NVDAACPI 42302E31
NVDA  1010101)
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:15 APIC version 16
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:b0000000)
[    0.000000] Built 1 zonelists.  Total pages: 260081
[    0.000000] Kernel command line:
root=UUID=8a5fa39c-1902-4d8e-a4da-dadef82a200c ro quiet splash
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1808.265 MHz processor.
[   21.782614] spurious 8259A interrupt: IRQ7.
[   21.784795] Console: colour VGA+ 80x25
[   21.785171] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   21.785599] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   21.807729] Memory: 1027368k/1048512k available (2015k kernel code,
20412k reserved, 916k data, 364k init, 131008k highmem)
[   21.807740] virtual kernel memory layout:
[   21.807741]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[   21.807742]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   21.807743]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   21.807745]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   21.807746]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[   21.807747]       .data : 0xc02f7d26 - 0xc03dce84   ( 916 kB)
[   21.807749]       .text : 0xc0100000 - 0xc02f7d26   (2015 kB)
[   21.807752] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[   21.807788] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4,
CPUs=1, Nodes=1
[   21.887772] Calibrating delay using timer specific routine..
3620.24 BogoMIPS (lpj=7240492)
[   21.887798] Security Framework v1.0.0 initialized
[   21.887804] SELinux:  Disabled at boot.
[   21.887817] Mount-cache hash table entries: 512
[   21.887935] CPU: After generic identify, caps: 078bfbff ebd3fbff
00000000 00000000 00002001 00000000 0000001d
[   21.887943] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   21.887946] CPU: L2 Cache: 512K (64 bytes/line)
[   21.887949] CPU: After all inits, caps: 078bfbff ebd3fbff 00000000
00000410 00002001 00000000 0000001d
[   21.887959] Compat vDSO mapped to ffffe000.
[   21.887970] Checking 'hlt' instruction... OK.
[   21.903899] SMP alternatives: switching to UP code
[   21.904094] Freeing SMP alternatives: 11k freed
[   21.904360] Early unpacking initramfs... done
[   22.242616] ACPI: Core revision 20070126
[   22.242679] ACPI: Looking for DSDT in initramfs... error, file
/DSDT.aml not found.
[   22.246328] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 02
[   22.246345] Total of 1 processors activated (3620.24 BogoMIPS).
[   22.246534] ENABLING IO-APIC IRQs
[   22.246734] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[   22.391574] Brought up 1 CPUs
[   22.391670] Booting paravirtualized kernel on bare hardware
[   22.391734] Time: 16:54:38  Date: 10/12/107
[   22.391755] NET: Registered protocol family 16
[   22.391823] EISA bus registered
[   22.391835] ACPI: bus type pci registered
[   22.397503] PCI: PCI BIOS revision 3.00 entry at 0xfafb0, last bus=2
[   22.397506] PCI: Using configuration type 1
[   22.397508] Setting up standard PCI resources
[   22.402503] ACPI: EC: Look up EC in DSDT
[   22.407895] ACPI: Interpreter enabled
[   22.407898] ACPI: (supports S0 S1 S4 S5)
[   22.407911] ACPI: Using IOAPIC for interrupt routing
[   22.416265] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   22.416271] PCI: Probing PCI hardware (bus 00)
[   22.416814] PCI: Transparent bridge - 0000:00:04.0
[   22.416916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   22.417130] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[   22.446675] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15)
[   22.446824] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)
[   22.446976] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14
15) *0, disabled.
[   22.447123] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14
15) *0, disabled.
[   22.447269] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14
15) *0, disabled.
[   22.447414] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14
15) *0, disabled.
[   22.447563] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14
15) *0, disabled.
[   22.447710] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14
15) *0, disabled.
[   22.447856] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14
15) *0, disabled.
[   22.448003] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14
15) *0, disabled.
[   22.448150] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[   22.448296] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
[   22.448443] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[   22.448588] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14
15) *0, disabled.
[   22.448736] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[   22.448890] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[   22.449039] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14
15) *0, disabled.
[   22.449186] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[   22.449334] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14
15) *0, disabled.
[   22.449517] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[   22.449691] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[   22.449865] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[   22.450039] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[   22.450212] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[   22.450386] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[   22.450560] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[   22.450734] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[   22.450908] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled.
[   22.451084] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[   22.451259] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[   22.451434] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[   22.451614] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[   22.451789] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[   22.451964] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[   22.452139] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[   22.452314] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[   22.452490] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[   22.452665] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[   22.452750] Linux Plug and Play Support v0.97 (c) Adam Belay
[   22.452759] pnp: PnP ACPI init
[   22.452766] ACPI: bus type pnp registered
[   22.456999] pnp: PnP ACPI: found 15 devices
[   22.457001] ACPI: ACPI bus type pnp unregistered
[   22.457006] PnPBIOS: Disabled by ACPI PNP
[   22.457048] PCI: Using ACPI for IRQ routing
[   22.457052] PCI: If a device doesn't work, try "pci=routeirq".  If
it helps, post a report
[   22.489584] NET: Registered protocol family 8
[   22.489586] NET: Registered protocol family 20
[   22.489637] pnp: 00:01: ioport range 0x1000-0x107f has been reserved
[   22.489640] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
[   22.489643] pnp: 00:01: ioport range 0x1400-0x147f has been reserved
[   22.489646] pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
[   22.489649] pnp: 00:01: ioport range 0x1800-0x187f has been reserved
[   22.489652] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
[   22.489655] pnp: 00:01: iomem range 0xfefe0000-0xfefe01ff could not
be reserved
[   22.489659] pnp: 00:01: iomem range 0xfefe1000-0xfefe10ff could not
be reserved
[   22.489661] pnp: 00:01: iomem range 0x0-0x0 could not be reserved
[   22.489671] pnp: 00:0d: iomem range 0xf0000000-0xf1ffffff could not
be reserved
[   22.489676] pnp: 00:0e: iomem range 0xd0000-0xd3fff has been reserved
[   22.489679] pnp: 00:0e: iomem range 0xd5800-0xd7fff has been reserved
[   22.489682] pnp: 00:0e: iomem range 0xf0000-0xfbfff could not be reserved
[   22.489685] pnp: 00:0e: iomem range 0xfc000-0xfffff could not be reserved
[   22.491495] Time: tsc clocksource has been installed.
[   22.519907] PCI: Bridge: 0000:00:04.0
[   22.519909]   IO window: disabled.
[   22.519913]   MEM window: f5000000-f6ffffff
[   22.519915]   PREFETCH window: disabled.
[   22.519920] PCI: Bridge: 0000:00:0c.0
[   22.519922]   IO window: disabled.
[   22.519925]   MEM window: f2000000-f4ffffff
[   22.519927]   PREFETCH window: e0000000-efffffff
[   22.519937] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   22.519945] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   22.519956] NET: Registered protocol family 2
[   22.559497] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   22.559620] TCP established hash table entries: 131072 (order: 8,
1572864 bytes)
[   22.560964] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   22.561463] TCP: Hash tables configured (established 131072 bind 65536)
[   22.561466] TCP reno registered
[   22.571577] checking if image is initramfs... it is
[   23.023248] Switched to high resolution mode on CPU 0
[   23.235445] Freeing initrd memory: 7546k freed
[   23.235764] audit: initializing netlink socket (disabled)
[   23.235776] audit(1194886478.084:1): initialized
[   23.235830] highmem bounce pool size: 64 pages
[   23.237298] VFS: Disk quotas dquot_6.5.1
[   23.237342] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   23.237419] io scheduler noop registered
[   23.237421] io scheduler anticipatory registered
[   23.237423] io scheduler deadline registered
[   23.237436] io scheduler cfq registered (default)
[   23.263073] Boot video device is 0000:02:00.0
[   23.263142] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   23.263163] assign_interrupt_mode Found MSI capability
[   23.263165] Allocate Port Service[0000:00:0c.0:pcie00]
[   23.263260] isapnp: Scanning for PnP cards...
[   23.616113] isapnp: No Plug & Play device found
[   23.636080] Real Time Clock Driver v1.12ac
[   23.636164] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing enabled
[   23.636256] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   23.636404] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   23.636854] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   23.637060] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   23.637611] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[   23.637779] input: Macintosh mouse button emulation as /class/input/input0
[   23.637838] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[   23.638169] serio: i8042 KBD port at 0x60,0x64 irq 1
[   23.638174] serio: i8042 AUX port at 0x60,0x64 irq 12
[   23.638294] mice: PS/2 mouse device common for all mice
[   23.638377] EISA: Probing bus 0 at eisa.0
[   23.638384] Cannot allocate resource for EISA slot 1
[   23.638404] EISA: Detected 0 cards.
[   23.638543] TCP cubic registered
[   23.638559] NET: Registered protocol family 1
[   23.638579] Using IPI No-Shortcut mode
[   23.638723]   Magic number: 15:519:944
[   23.638803]   hash matches device ptyyf
[   23.638881]   hash matches device tty1
[   23.639163] Freeing unused kernel memory: 364k freed
[   23.682889] input: AT Translated Set 2 keyboard as /class/input/input1
[   24.844329] AppArmor: AppArmor
initialized<5>audit(1194886479.584:2):  type=1505 info="AppArmor
initialized" pid=1172
[   24.852701] fuse init (API version 7.8)
[   24.857317] Failure registering capabilities with primary security module.
[   24.870835] ACPI Exception (processor_core-0783): AE_NOT_FOUND,
Processor Device is not present [20070126]
[   25.448328] usbcore: registered new interface driver usbfs
[   25.448350] usbcore: registered new interface driver hub
[   25.448368] usbcore: registered new device driver usb
[   25.448976] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller
(OHCI) Driver
[   25.449322] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[   25.449329] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] ->
GSI 23 (level, low) -> IRQ 16
[   25.449341] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   25.449344] ohci_hcd 0000:00:02.0: OHCI Host Controller
[   25.449500] ohci_hcd 0000:00:02.0: new USB bus registered, assigned
bus number 1
[   25.449515] ohci_hcd 0000:00:02.0: irq 16, io mem 0xf7006000
[   25.485714] forcedeth.c: Reverse Engineered nForce ethernet driver.
Version 0.60.
[   25.506420] SCSI subsystem initialized
[   25.510733] libata version 2.21 loaded.
[   25.525305] usb usb1: configuration #1 chosen from 1 choice
[   25.525333] hub 1-0:1.0: USB hub found
[   25.525343] hub 1-0:1.0: 8 ports detected
[   25.538314] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   25.538319] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[   25.629298] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[   25.629307] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] ->
GSI 22 (level, low) -> IRQ 17
[   25.629318] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   25.629321] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   25.629343] ehci_hcd 0000:00:02.1: new USB bus registered, assigned
bus number 2
[   25.629373] ehci_hcd 0000:00:02.1: debug port 1
[   25.629377] PCI: cache line size of 64 is not supported by device
0000:00:02.1
[   25.629386] ehci_hcd 0000:00:02.1: irq 17, io mem 0xf7007000
[   25.629394] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
[   25.629459] usb usb2: configuration #1 chosen from 1 choice
[   25.629485] hub 2-0:1.0: USB hub found
[   25.629493] hub 2-0:1.0: 8 ports detected
[   25.712654] Floppy drive(s): fd0 is 1.44M
[   25.730180] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[   25.730188] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] ->
GSI 21 (level, low) -> IRQ 18
[   25.730195] PCI: Setting latency timer of device 0000:00:07.0 to 64
[   25.730201] forcedeth: using HIGHDMA
[   25.775510] FDC 0 is a post-1991 82077
[   26.249673] eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:07.0
[   26.249934] sata_nv 0000:00:08.0: version 3.4
[   26.250251] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[   26.250258] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] ->
GSI 20 (level, low) -> IRQ 19
[   26.250296] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   26.250359] scsi0 : sata_nv
[   26.250395] scsi1 : sata_nv
[   26.250448] ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2
bmdma 0x0001e000 irq 19
[   26.250452] ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72
bmdma 0x0001e008 irq 19
[   26.717106] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   26.766891] ata1.00: Host Protected Area detected:
[   26.766893]  current size: 625140335 sectors
[   26.766894]  native size: 625142448 sectors
[   26.891747] ata1.00: native size increased to 625142448 sectors
[   26.891752] ata1.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
[   26.891755] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   26.958383] ata1.00: configured for UDMA/133
[   27.268785] ata2: SATA link down (SStatus 0 SControl 300)
[   27.279086] scsi 0:0:0:0: Direct-Access     ATA      ST3320620AS
  3.AA PQ: 0 ANSI: 5
[   27.281969] NFORCE-MCP61: IDE controller at PCI slot 0000:00:06.0
[   27.281988] NFORCE-MCP61: chipset revision 162
[   27.281990] NFORCE-MCP61: not 100% native mode: will probe irqs later
[   27.281997] NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
[   27.282005]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings:
hda:DMA, hdb:DMA
[   27.282014] Probing IDE interface ide0...
[   27.299122] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[   27.299135] sd 0:0:0:0: [sda] Write Protect is off
[   27.299138] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   27.299152] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[   27.299196] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[   27.299203] sd 0:0:0:0: [sda] Write Protect is off
[   27.299206] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   27.299218] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[   27.299222]  sda: sda1 sda2 < sda5 >
[   27.333214] sd 0:0:0:0: [sda] Attached SCSI disk
[   27.337425] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   27.523507] Attempting manual resume
[   27.523511] swsusp: Resume From Partition 8:5
[   27.523512] PM: Checking swsusp image.
[   27.523688] PM: Resume from disk failed.
[   27.564516] kjournald starting.  Commit interval 5 seconds
[   27.564526] EXT3-fs: mounted filesystem with ordered data mode.
[   28.016458] hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive
[   28.688263] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   31.802359] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[   31.802385] i2c-adapter i2c-1: nForce2 SMBus adapter at 0xc800
[   32.185129] ath_hal: module license 'Proprietary' taints kernel.
[   32.185696] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111,
RF5112, RF2413, RF5413)
[   32.866581] wlan: 0.8.4.2 (0.9.3.2)
[   32.942966] Linux video capture interface: v2.00
[   32.980240] input: PC Speaker as /class/input/input2
[   32.990383] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   32.992958] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   33.016537] ath_pci: 0.9.4.5 (0.9.3.2)
[   33.016902] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[   33.016909] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] ->
GSI 17 (level, low) -> IRQ 20
[   33.310409] cx2388x v4l2 driver version 0.0.6 loaded
[   33.341496] ath_rate_sample: 1.2 (0.9.3.2)
[   33.398491] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[   33.398498] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps
9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[   33.398506] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[   33.398510] wifi0: mac 5.6 phy 4.1 radio 1.7
[   33.398514] wifi0: Use hw queue 1 for WME_AC_BE traffic
[   33.398516] wifi0: Use hw queue 0 for WME_AC_BK traffic
[   33.398518] wifi0: Use hw queue 2 for WME_AC_VI traffic
[   33.398520] wifi0: Use hw queue 3 for WME_AC_VO traffic
[   33.398522] wifi0: Use hw queue 8 for CAB traffic
[   33.398524] wifi0: Use hw queue 9 for beacons
[   33.479975] wifi0: Atheros 5212: mem=0xf6000000, irq=20
[   33.480315] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[   33.480323] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC1] ->
GSI 16 (level, low) -> IRQ 21
[   33.480370] CORE cx88[0]: subsystem: 107d:6613, board: Leadtek
Winfast 2000XP Expert [card=5,autodetected]
[   33.480374] TV tuner 44 at 0x1fe, Radio tuner -1 at 0x1fe
[   33.507816] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB
Cache, UDMA(66)
[   33.507825] Uniform CD-ROM driver Revision: 3.20
[   33.514024] Linux agpgart interface v0.102 (c) Dave Jones
[   33.624026] cx88[0]: Leadtek Winfast 2000XP Expert config:
tuner=43, eeprom[0]=0x01
[   33.624135] input: cx88 IR (Leadtek Winfast 2000XP as /class/input/input3
[   33.624171] cx88[0]/0: found at 0000:01:06.0, rev: 5, irq: 21,
latency: 32, mmio: 0xf5000000
[   33.728245] tuner 2-0043: chip found @ 0x86 (cx88[0])
[   33.728272] tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
[   33.730177] tuner 2-0060: All bytes are equal. It is not a TEA5767
[   33.730180] tuner 2-0060: chip found @ 0xc0 (cx88[0])
[   33.730191] tuner 2-0060: type set to 43 (Philips NTSC MK3
(FM1236MK3 or FM1236/F))
[   33.730194] tuner 2-0060: type set to 43 (Philips NTSC MK3
(FM1236MK3 or FM1236/F))
[   34.066740] cx88[0]/0: registered device video0 [v4l2]
[   34.066768] cx88[0]/0: registered device vbi0
[   34.066792] cx88[0]/0: registered device radio0
[   34.071980] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[   34.071986] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC5] ->
GSI 16 (level, low) -> IRQ 21
[   34.071995] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   34.072221] NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19
Wed Sep 12 14:12:24 PDT 2007
[   34.138191] input: ImPS/2 Generic Wheel Mouse as /class/input/input4
[   34.151497] parport_pc 00:0a: reported by Plug and Play ACPI
[   34.151542] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   34.175029] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[   34.175034] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] ->
GSI 23 (level, low) -> IRQ 16
[   34.175050] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   35.479229] lp0: using parport0 (interrupt-driven).
[   35.702180] Adding 3028212k swap on /dev/sda5.  Priority:-1
extents:1 across:3028212k
[   36.211983] EXT3 FS on sda1, internal journal
[   37.745666] input: Power Button (FF) as /class/input/input5
[   37.749465] ACPI: Power Button (FF) [PWRF]
[   37.784148] input: Power Button (CM) as /class/input/input6
[   37.787897] ACPI: Power Button (CM) [PWRB]
[   37.891482] No dock devices found.
[   40.500209] eth0: no link during initialization.
[   41.015438] NET: Registered protocol family 10
[   41.015637] lo: Disabled Privacy Extensions
[   41.015898] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   51.810881] ath0: no IPv6 routers present
[17321.568159] NET: Registered protocol family 17
[17381.993312] ADDRCONF(NETDEV_UP): ath0: link is not ready
[17384.365711] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
[17395.123154] ath0: no IPv6 routers present
[17433.156778] ADDRCONF(NETDEV_UP): ath0: link is not ready
[17435.643805] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
[17446.030412] ath0: no IPv6 routers present
[17484.279347] ADDRCONF(NETDEV_UP): ath0: link is not ready
[17486.670908] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
[17501.451123] ath0: no IPv6 routers present

Now gentlemen and ladies I am new to this and trying to get this
working I like it so far so any info to help me will be greatly
appreciated





On Nov 11, 2007 1:53 AM, Bill Williamson <bill at bbqninja.com> wrote:
> On 11/11/07, John Drescher <drescherjm at gmail.com> wrote:
> > On Nov 10, 2007 10:24 PM, Micheal Drew <blackprince26 at gmail.com> wrote:
> > > Here is my LSPCI
> > >
> > > 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
> >
> > I believe the correct driver is snd_hda_intel.
> >
> > if you execute the following command and get output like what I have
> > you do not have the driver compiled in your kernel.
> >  zgrep HDA /proc/config.gz
> > # CONFIG_SENSORS_HDAPS is not set
> > # CONFIG_SND_HDA_INTEL is not set
>
>
> Ubuntu/mythbuntu has these compiled in, so unless he's done something
> crazy like strapping in his own kernel I'm fairly certain the issue is
> elsewhere.  Perhaps the posted output of dmesg would help?
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>


More information about the mythtv-users mailing list