[mythtv-users] mythtv-setup and lirc? problem

[scott at tbwifi.ca]

Does anyone else have some guidance on this issue?  If I compile myth
without the lirc support things appear to work okay.  Surely there are
other Mandriva 2007 64 bit installs out there with Myth .20?  I am at a
standstill now.  Any help would be greatly appreciated.

Thx!!
Scott

> I just used urpmi lirc lirc-remotes in Mandriva.
>
> testing using irw suggests everything is working fine
>
> My original intent was to compile lirc as you suggested but I had problems
> with ./setup.sh that I haven't had in the past with a different PC and or
> distro.  I tried to pick the driver manually, but that didn't work either.
>  When I found the right Website the easier RPM route seemed to work.
>
> http://www.mandrake.tips.4.free.fr/configuration2006.html
>
> To get the remote control that came with my tv-card working, I needed
> LIRC, so I issued the following commands, as root:
> urpmi lirc lirc-remotes
> cp /usr/share/lirc-remotes/hauppauge/lircd.conf.hauppauge /etc/lircd.conf
> cp /usr/share/lirc-remotes/hauppauge/lircmd.conf.hauppauge
> /etc/lircmd.conf
> vi /etc/sysconfig/lircd
> (feel free to use any other text editor instead of vi) where I changed the
> following things:
> DRIVER=UNCONFIGURED into: DRIVER=default
> and:
> HWMOD=UNCONFIGURED I replace with the following 2 things:
> HWMOD=lirc_dev
> HWMOD=lirc_i2c
> Note that the lirc device is now correctly mentioned as /dev/lirc/0 so
> contrary to Mdv05 no need to change anything.
>
> Finally, to start things I issued these 2 commands:
> service lircd start
> service lircmd start
>
> Other thoughts?
>
>> Did you just run ./configure then make then make install instead of
>> ./setup.sh, make, make install?
>>
>> (Assuming you are using the latest LIRC drivers)?
>>
>> -----Original Message-----
>> From: mythtv-users-bounces at mythtv.org
>> [mailto:mythtv-users-bounces at mythtv.org] On Behalf Of scott at tbwifi.ca
>> Sent: Wednesday, May 16, 2007 12:46 AM
>> To: mythtv-users at mythtv.org
>> Subject: [mythtv-users] mythtv-setup and lirc? problem
>>
>> I have just rerun ./configure since I've got Lirc working.  After the
>> compile,    I attempted to run mythtv-setup.  The result was
>>
>> [root at power mythtv]# mythtv-setup
>> 2007-05-15 22:35:00.144 Using runtime prefix = /usr/local
>> 2007-05-15 22:35:00.148 DPMS is active.
>> 2007-05-15 22:35:00.170 New DB connection, total: 1
>> 2007-05-15 22:35:00.172 Connected to database 'mythconverg' at host:
>> localhost
>> 2007-05-15 22:35:00.173 Total desktop dim: 1024x768, with 1 screen[s].
>> 2007-05-15 22:35:00.181 Using screen 0, 1024x768 at 0,0
>> 2007-05-15 22:35:00.192 Current Schema Version: 1158
>> 2007-05-15 22:35:00.196 Total desktop dim: 1024x768, with 1 screen[s].
>> 2007-05-15 22:35:00.197 Using screen 0, 1024x768 at 0,0
>> 2007-05-15 22:35:00.197 Switching to square mode (G.A.N.T.) libGL
>> warning:
>> 3D driver claims to not support visual 0x4b
>> 2007-05-15 22:35:00.247 Using the Qt painter
>> mythtv-setup: symbol lookup error: /usr/local/lib/libmythui-0.20.so.0:
>> undefined symbol: _ZN10LircClientC1EP7QObject
>>
>> Can someone offer some guidance please?  Google has come up dry.
>>
>> Thx!
>> Scott
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users at mythtv.org
>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users at mythtv.org
>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>