[mythtv-users] Toshiba Renza 42LX196 Modeline

Melvin J. Cureton melvincureton at MELCRYS.COM
Sun May 6 20:21:17 UTC 2007


Since it's showing a res of 1920x540( i.e. ½ 1080), do I need to see if I'm running a single link or dual link? And of course how do I tell mode it is in?

 

________________________________

From: mythtv-users-bounces at mythtv.org [mailto:mythtv-users-bounces at mythtv.org] On Behalf Of Melvin J. Cureton
Sent: Friday, May 04, 2007 3:24 PM
To: mythtv-users at mythtv.org
Subject: [mythtv-users] Toshiba Renza 42LX196 Modeline

 

I am using the above LCD TV and am trying to get 1080p working over HDMI.

 

Opteron 240

2GB DDR 333

ATI 9550 AGP VGA/DVI/S-Video/Composite

17" LCD Monitor (1280x1024) on VGA

42" LCD TV (480i,480p,720p,1080i,1080p) on DVI to HDMI cable

 

# Xorg configuration created by system-config-display

Section "ServerLayout"
        Identifier     "Multihead layout"
        Screen      0  "Screen0" LeftOf "Screen1"
        Screen      1  "Screen1" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
        Option      "Xinerama" "off"
        Option      "Clone" "on"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "us"
EndSection

Section "Monitor"
        Identifier   "Monitor1"
        VendorName   "Monitor Vendor"
        ModelName    "LCD Panel 1280x1024"
 ### Comment all HorizSync and VertSync values to use DDC:
        HorizSync    31.5 - 67.0
        VertRefresh  50.0 - 75.0
        Option      "dpms"
EndSection

Section "Device"
        Identifier  "Videocard0"
        Driver      "radeon"
EndSection

Section "Device"
        Identifier  "Videocard1"
        Driver      "radeon"
        VendorName  "Videocard Vendor"
        BoardName   "ATI Technologies Inc RV350 AS [Radeon 9550]"
        BusID       "PCI:2:0:0"
        Screen      1
        Option "MonitorLayout" "TMDS, TMDS"

EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes    "1920x1080_60" "1280x720_60"
        EndSubSection
EndSection

Section "Screen"
        Identifier "Screen1"
        Device     "Videocard1"
        Monitor    "Monitor1"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Depth     24
                Modes    "1280x1024" "1280x960" "1280x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

When I right click on the dekstop and go to display it shows a resolution of 1920x540. Any ideas why? Is it due to the dual head setup? I'd rather just run the tv on DVI alone but I see no post/boot info which I'd like to be able to watch for errors.

 

 

Thank You

Melvin Cureton

melvincureton at melcrys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20070506/cfb4b848/attachment.htm 


More information about the mythtv-users mailing list