[mythtv-users] Sony Vaio front end locks up

[Lonnie Borntreger]

System:
 Sony Vaio laptop, 1.3GHz Mobile Athlon.
 Kernel 2.6.18.
 Xorg ati driver
 - MythTV 0.20 using libmpeg2 (same results using "Standard").

I can play a MythTV recorded mpg file using kaffiene perfectly, but when
I try to watch a recording in mythfrontend, I get:

2007-03-28 01:57:50.205 Connected to database 'mythconverg' at host:
10.0.0.20
2007-03-28 01:57:50.300 TV: Attempting to change from None to
WatchingPreRecorded
2007-03-28 01:57:50.404 DPMS Deactivated
0: start_time: 0.036 duration: 330.759
1: start_time: 0.030 duration: 330.769
stream: start_time: 0.334 duration: 3675.216 bitrate=6703 kb/s
2007-03-28 01:57:50.448 AFD: Opened codec 0x8e40e80, id(MPEG2VIDEO)
type(Video)
2007-03-28 01:57:50.448 AFD: Opened codec 0x8eab510, id(MP2) type(Audio)
2007-03-28 01:57:50.457 Opening OSS audio device '/dev/dsp'.
2007-03-28 01:57:50.651 VideoOutputXv: XvMCTex: Init failed
2007-03-28 01:57:50.652 VideoOutputXv: XVideo Adaptor Name: 'ATI Mach64
Back-end Overlay Scaler'

Here is where the system locks hard.

Does anybody have any guidance for debugging this?

Lonnie
========== pci info ==========
localhost-> lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
(rev 03)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 40)
00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1a)
00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1a)
00:07.4 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
(rev 40)
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686
AC97 Audio Controller (rev 50)
00:07.6 Communication controller: VIA Technologies, Inc. AC'97 Modem
Controller (rev 30)
00:0a.0 CardBus bridge: Texas Instruments PCI1420
00:0a.1 CardBus bridge: Texas Instruments PCI1420
00:0e.0 FireWire (IEEE 1394): Texas Instruments TSB12LV26 IEEE-1394
Controller (Link)
00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility
P/M AGP 2x (rev 64)
localhost-> lspcidrake
via-agp         : VIA Technologies Inc.|VT8363/8365 [KT133/KM133]
[BRIDGE_HOST]
agpgart         : VIA Technologies Inc.|VT8363/8365 [KT133/KM133 AGP]
[BRIDGE_PCI]
unknown         : VIA Technologies Inc.|VT82C686 [Apollo Super]
[BRIDGE_ISA]
via82cxxx       : VIA Technologies Inc.|VT82C586 IDE [Apollo]
[STORAGE_IDE]
uhci-hcd        : VIA Technologies Inc.|VT82C586B USB [SERIAL_USB]
uhci-hcd        : VIA Technologies Inc.|VT82C586B USB [SERIAL_USB]
i2c-viapro      : VIA Technologies Inc.|VT82C686 [Apollo Super ACPI]
[BRIDGE_ISA]
snd-via82xx     : VIA Technologies Inc.|VT82C686 [Apollo Super
AC97/Audio] [MULTIMEDIA_AUDIO]
slamr           : VIA Technologies Inc.|VT82C686 [Apollo Super
AC97/Modem] [COMMUNICATION_OTHER]
yenta_socket    : Texas Instruments|PCI1420 PC Card Controller
[BRIDGE_CARDBUS]
yenta_socket    : Texas Instruments|PCI1420 PC Card Controller
[BRIDGE_CARDBUS]
ohci1394        : Texas Instruments|TSB12LV26 OHCI-Lynx PCI IEEE 1394
Host Controller [SERIAL_FIREWIRE]
8139too         : Realtek Semiconductor|RTL-8139 [NETWORK_ETHERNET]
Card:ATI Rage Mobility: ATI Technologies Inc.|Rage Mobility P/M AGP 2x
[DISPLAY_VGA]
hub             : Linux 2.6.18.6.tex1 uhci_hcd|UHCI Host Controller
[Hub|Unused]
hub             : Linux 2.6.18.6.tex1 uhci_hcd|UHCI Host Controller
[Hub|Unused]