[mythtv-users] ivtv doesn't seem to register with KWorld Terminator

[Angus]

Nick Morrott wrote:
> On 13/03/07, Angus <sylvania at istop.com> wrote:
>   
>> Nick Morrott wrote:
>>     
>>> On 13/03/07, Angus <sylvania at istop.com> wrote:
>>>
>>>       
>>>> I think the problem starts with ivtv, following the directions on
>>>>
>>>>         
>>> Using the wrong driver will not make hardware magically work :)
>>>
>>>       
>>     That's very true, but if you'll look at my post again, you'll see
>> that it has nothing to do with not making the hardware work, but making
>> it work.
>>     
>
> Sorry, perhaps I misunderstood. Why are you loading ivtv and checking
> its syslog output? Do you have another card that is supported by ivtv
> that is not being detected? Your Terminator card is *not* supported by
> ivtv.
>
> You also seem to be running a 586 kernel - what CPU are you running?
>
> There are more instructions on getting 7134-based capture cards
> working here: http://www.linuxtv.org/v4lwiki/index.php/Generic_SAA7134_Card_Installation.
> Note you may need to tweak the tuner option for the saa7134 module and
> enable the i2c scan per the link.
>   

    I could also use some help with the remote setup. cat 
/proc/bus/input/devices shows no remote (only the keyboard, USB mouse 
and speaker) and lirc.org isn't much help either. It seems to expect 
there to be a /dev/lirc, but there isn't. I've installed lirc from rpm, btw