[mythtv-users] Sharp LC-26GA5U Modeline
JDP DATA
jdpdata at gmail.com
Tue Feb 6 20:57:55 UTC 2007
Guys, I need help setting my LCD to output native 1280x768 or 1366x768 is
even better. I tried Jarod's Powerstrip method, I can get 1280x768 in
Windows (albeit black bars on the side) and 1366x768 looks horrible so I
gave up on try that. So I copied the modeline for 1280x768 into xorg.conf,
but it's being ignore for some reason, I can only get 1024x768.
I attached my xorg.conf and Xorg.0.log if any kind soul would diagnose for
me.
Specs:
FC5/MythDora 3.2 Front/BackEnd
P4 3.0G /1G RAM
PNY GeForce 6200 256MB
2x Kworld ASTC 110
1x Hauppuage PVR-150
Sharp LC26GA5U DVI -> DVI
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is
# used to render fonts.
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
#Load "dri"
Load "v4l"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Sharp"
ModelName "LC-26GA5U"
### Comment all HorzSync and VertSync values to use DDC:
HorizSync 48.1
VertRefresh 60.0
Option "dpms"
# My 1280x768p mode
Mode "1280x768p"
DotClock 81.000
HTimings 1280 1328 1440 1688
VTimings 768 769 772 802
Flags "+HSync" "-VSync"
EndMode
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nv"
VendorName "Videocard vendor"
BoardName "nVidia Corporation GeForce 6200"
Option "NoDDC"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x768p"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
(II) NV(0): Mode "1280x768p" is larger than BIOS programmed panel size of
1024 x 768. Removing.
(II) NV(0): Not using mode "1280x768p" (unknown reason)
II) NV(0): Not using mode "1280x768p" (no mode of this name)
(--) NV(0): Virtual size is 1024x768 (pitch 1024)
(**) NV(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777
806 -hsync -vsync
(==) NV(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20070206/483abab9/attachment.htm
More information about the mythtv-users
mailing list