[mythtv-users] Mythtv can't tune one channel tunable Re: Mythtv can't tune one channel tunable using tzap+mplayer

[Ian Peake]

William Munson <w.munson at comcast.net> wrote:
>> tzap "SBS" shows..
>>
>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>> tuning to 536625000 Hz
>> video pid 0x00a1, audio pid 0x0051
>> status 07 | signal 9748 | snr 0000 | ber 001fffff | unc 00000035 |
>> status 1f | signal 978f | snr 0000 | ber 00000000 | unc 000000d8 |
FE_HAS_LOCK
>> status 1f | signal 97c8 | snr 0000 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
>> status 1f | signal 9765 | snr 0000 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
>> ..
>>
>
>From your tzap report I would say that you may need to add a new
>transport to your dtv_channel table with a freq of 536625000 Hz and then
>set the channels table entry for your problem channel to your new
>transport number.

Thanks for your suggestion. I did not mention that I tried several
similar frequencies both using tzap and mythtv,
including 536625000. The log I gave previously was for mythtv trying I
think a slightly higher frequency.
I have uploaded a new log for the 536625000 frequency, set via mysql
as you suggested. AFAICS it is not substantially different from the
previous one:

http://pastebin.ca/835989

>Bill

Kind regards,

Ian Peake

P.S.: If anyone can suggest a way to properly reply to list messages
received in digest mode, within gmail, preserving
threading etc., I would appreciate it!