[mythtv-users] ivtv0, MPEG buffers full. Dropping Data (Help please)

[Daniel Arfsten]

I just went to look at dmesg for some other reason and found these errors.
 
[108715.863315] ivtv0: All encoder MPEG stream buffers are full. Dropping data.[108715.863320] ivtv0: Cause: the application is not reading fast enough.[187845.748109] ivtv0: All encoder MPEG stream buffers are full. Dropping data.[187845.748115] ivtv0: Cause: the application is not reading fast enough.
 
I haven't noticed any problems with recordings BUT I do have to admit I am WAY behind on watching stuff. I am still watching stuff recorded back in October. I have 197 shows to watch (per xbmcmythtv. this is where I watch all my stuff), most of them are 30 minutes long and include Family Guy, Cane, Scrubs, CSI, etc etc.
 
I have found a few things through gogle but they all seem old and not related to this version of the ivtv module. Per dmesg, this is my ivtv info:
 
[   18.159785] ivtv:  ==================== START INIT IVTV ====================[   18.159790] ivtv:  version 0.10.1 (tagged release) loading[   18.159791] ivtv:  Linux version: 2.6.20-16-generic SMP mod_unload 586[   18.159793] ivtv:  In case of problems please include the debug info between[   18.159795] ivtv:  the START INIT IVTV and END INIT IVTV lines, along with[   18.159797] ivtv:  any module options, when mailing the ivtv-users mailinglist.[   18.159858] ivtv0: Autodetected Hauppauge card (cx23415 based)[   18.159947] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)[   18.874227] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)[   18.910022] ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)[   19.135115] ivtv0: Encoder revision: 0x02050032[   19.135117] ivtv0: Recommended firmware version is 0x02060039.[   19.143133] ivtv0: Decoder revision: 0x02020023[   19.208974] ivtv0: Autodetected Hauppauge WinTV PVR-350[   19.232221] tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)[   19.236874] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)[   19.309445] saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)[   19.551679] saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)[   19.577813] msp3400 1-0040: MSP4448G-B3 found @ 0x80 (ivtv i2c driver #0)[   19.577978] ivtv0: Registered device video0 for encoder MPEG (4 MB)[   19.578148] ivtv0: Registered device video32 for encoder YUV (2 MB)[   19.578355] ivtv0: Registered device vbi0 for encoder VBI (1 MB)[   19.578443] ivtv0: Registered device video24 for encoder PCM audio (1 MB)[   19.578660] ivtv0: Registered device radio0 for encoder radio[   19.578687] ivtv0: Registered device video16 for decoder MPEG (1 MB)[   19.578743] ivtv0: Registered device vbi8 for decoder VBI (1 MB)[   19.579118] ivtv0: Registered device vbi16 for decoder VOUT[   19.579147] ivtv0: Registered device video48 for decoder YUV (1 MB)[   19.675418] ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)[   20.143598] ivtv0: Initialized Hauppauge WinTV PVR-350, card #0[   20.143643] ivtv:  ====================  END INIT IVTV  ====================
I am running mythtv from Ubuntu Feisty Updates repo. Aptitude shows this:
 0.20.2-0ubuntu0.7.04.1
I have a PVR-350 using the S-Video IN connection which is capturing the SA3250 cable box output.
 
Any help would be appreciated.
 
Daniel
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20071227/283079fe/attachment.htm