[mythtv-users] Problem with Hauppauge WINTV Nova-T 500 PCI

Wed Aug 29 08:24:49 UTC 2007

Are you sure that all channels are distributed by your tower, it´s plausible
that some channels are on another tower.
teracom has a list over that.

1. Try the LNA
2. If your reception is bad try the reception patch, it improves reception
for tuner 2.

/Henrik

On 8/29/07, Eduard Huguet <eduardhc at gmail.com> wrote:
>
> Hi,
>     Just 2 ideas:
>
>    - First: have you enabled the LNA amplifiers for the cards? I don't
>    know how must it be done for your distro, but in Gentoo you need to add a
>    line (check the wiki) into /etc/modules.d/modprobe.conf (IIRC).
>    - Second (and most important): check that your antenna has installed
>    amplifiers for all the desired channels.
>
> Don't rely on an external standalone DVB-T receival to find all channels,
> because the signal amplifiers included in these appareils are way more
> powerful than Nova-T's ones. I had the very same problem at first (my Nova-T
> was finding only a bunch of the available channels while an external
> receiver was finding them all), and it solved only after the building
> administration installed all the needed amplifiers.
>
> Best regards,
>   Eduard Huguet
>   Barcelona (Spain)
>
>
>
>
>
> ---------- Missatge reenviat ----------
> > From: "Joacim J" <jocke4news at gmail.com>
> > To: "Discussion about mythtv" <mythtv-users at mythtv.org>
> > Date: Tue, 28 Aug 2007 21:35:53 +0200
> > Subject: Re: [mythtv-users] Problem with Hauppauge WINTV Nova-T 500 PCI
> > On 8/27/07, Joacim J < jocke4news at gmail.com> wrote:
> > >
> > > Hello,
> > >
> > > I have recently bought two Hauppauge WINTV Nova-T 500 PCI cards (in
> > > total 4 adapters).
> > > I have installed them i my server, compiled the latest
> > > mythtv-0-20-fixes (revision 14312).
> > >
> > > When scanning for channels I get lots of timeouts (using 150 ms delay
> > > on the adapters) and two adapters doesn't find all channels but the other
> > > two does.
> > > - Do you have idea why it behaves like this??
> > > - You guys that are using those cards, what setting are you using in
> > > mythtv-setup?
> > > - To help troubleshooting, what other tool(s) do you recommend?
> > >
> > >
> > Some more information....
> > I plugged in a Sagem DVB-T Receiver where I have the server and tested
> > both antenna cables. Both gave this result:
> > Signal Strength: 91%
> > Signal Quality: 78%
> > BER < 1.0E-7
> > Singal to Noise: 21 - 24 dB
> > Frequence Sync: YES
> > TPS Sync: YES
> > Lock Front End: YES
> >
> > With my eyes this looks fine, right?
> >
> > When using scan I get the following result below (30 services but it
> > should about 52 services).
> >
> > What could be wrong?? DVB Firmware??
> > I have installed it using
> > http://www.mythtv.org/wiki/index.php/Hauppauge_WinTV_Nova-T_500_PCI
> > I have Kubuntu 7.04
> >
> > ============================================
> > root at frodo:/home/joacim# scan -a 0
> > /usr/share/doc/dvb-utils/examples/scan/dvb-t/se-Goteborg_Brudaremossen >
> > /root/.tzap/test
> > scanning
> > /usr/share/doc/dvb-utils/examples/scan/dvb-t/se-Goteborg_Brudaremossen
> > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> > initial transponder 626000000 0 2 9 3 1 2 0
> > initial transponder 522000000 0 2 9 3 1 2 0
> > initial transponder 778000000 0 2 9 3 1 2 0
> > initial transponder 594000000 0 3 9 3 1 3 0
> > initial transponder 818000000 0 2 9 3 1 2 0
> > >>> tune to:
> > 626000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> > 0x0000 0x13e2: pmt_pid 0x13e2 Sveriges Television -- SVT2 V�stnytt
> > (running)
> > 0x0000 0x1450: pmt_pid 0x1450 Sveriges Television -- SVT24 V�stnytt
> > (running)
> > 0x0000 0x13f6: pmt_pid 0x13f6 Sveriges Television -- SVT2 Sydnytt
> > (running)
> > 0x0000 0x0366: pmt_pid 0x0366 Sveriges Television -- Barn/Kunskapsk.
> > (running)
> > 0x0000 0x0370: pmt_pid 0x0370 Sveriges Television -- SVT Extra (running)
> > 0x0000 0x03f2: pmt_pid 0x03f2 Sveriges Television -- SVT1 (running)
> > 0x0000 0x0500: pmt_pid 0x0500 Sveriges Television -- SVT1 Tal txt
> > (running)
> > 0x0000 0x050a: pmt_pid 0x050a Sveriges Television -- SVT2 Tal txt
> > (running)
> > 0x0000 0xfffe: pmt_pid 0x0712 Boxer TV Access AB -- Boxer Navigator
> > (running, scrambled)
> > Network Name 'Teracom_Mux_1'
> > >>> tune to:
> > 522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> >
> > 0x0000 0x1856: pmt_pid 0x1856 TV4 AB -- TV4 G�teborg (running)
> > 0x0000 0x0488: pmt_pid 0x0488 TV4 AB -- CNN (running, scrambled)
> > 0x0000 0xfffe: pmt_pid 0x0712 Boxer TV Access AB -- Boxer Navigator
> > (running, scrambled)
> > 0x0000 0x047e: pmt_pid 0x047e TV4 AB -- TV4 Plus (running, scrambled)
> > 0x0000 0x0474: pmt_pid 0x0474 TV4 AB -- TV400 (running, scrambled)
> > 0x0000 0x046a: pmt_pid 0x046a TV4 AB -- TV4 Film (running, scrambled)
> > 0x0000 0x04c4: pmt_pid 0x04c4 TV4 AB -- TV4 Fakta (running, scrambled)
> > 0x0000 0x042e: pmt_pid 0x042e Viasat AB -- TV6 (running)
> > Network Name 'Teracom_Mux_2'
> > >>> tune to:
> > 778000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> >
> > 0x0000 0x119e: pmt_pid 0x119e Boxer TV Access AB -- SAGEM_DOWNLOAD
> > (running)
> > 0x0000 0x11bc: pmt_pid 0x11bc Boxer TV Access AB -- THOMSON download
> > (running)
> > 0x0000 0xfffe: pmt_pid 0x0712 Boxer TV Access AB -- Boxer Navigator
> > (running, scrambled)
> > 0x0000 0x1220: pmt_pid 0x1220 Boxer -- Dilog Download (running)
> > 0x0000 0x1234: pmt_pid 0x1234 Boxer TV -- Sagem SSU (running)
> > 0x0000 0x0456: pmt_pid 0x0456 Disney -- Disney Channel (running,
> > scrambled)
> > 0x0000 0x0424: pmt_pid 0x0424 DTU 7 -- Canal 7 (running, scrambled)
> > 0x0000 0x14d2: pmt_pid 0x14d2 Viasat AB -- TV3 (running, scrambled)
> > 0x0000 0x03ca: pmt_pid 0x03ca Canal+ Television AB -- C+ Film 2 Sport WE
> > (running, scrambled)
> > 0x0000 0x038e: pmt_pid 0x038e Canal+ Television AB -- C+ Film 1
> > (running, scrambled)
> > 0x0000 0x0384: pmt_pid 0x0384 Canal+ Television AB -- C+ Sport 1
> > (running, scrambled)
> > 0x0000 0x041a: pmt_pid 0x041a Kanal 5 Ltd -- Kanal 5 (running,
> > scrambled)
> > 0x0000 0x0442: pmt_pid 0x0442 Viasat AB -- TV8 (running, scrambled)
> > Network Name 'Teracom_Mux_3'
> > >>> tune to:
> > 594000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
> > WARNING: filter timeout pid 0x0011
> > WARNING: filter timeout pid 0x0000
> > WARNING: filter timeout pid 0x0010
> > >>> tune to:
> > 818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> >
> > WARNING: filter timeout pid 0x0011
> > WARNING: filter timeout pid 0x0000
> > WARNING: filter timeout pid 0x0010
> > >>> tune to:
> > 482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> >
> > WARNING: >>> tuning failed!!!
> > >>> tune to:
> > 482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> > (tuning failed)
> > WARNING: >>> tuning failed!!!
> > retrying with f=610000000
> > >>> tune to:
> > 610000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> > (tuning failed)
> > WARNING: >>> tuning failed!!!
> > >>> tune to:
> > 610000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> > (tuning failed)
> > WARNING: >>> tuning failed!!!
> > retrying with f=562000000
> > >>> tune to:
> > 562000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> > (tuning failed)
> > WARNING: >>> tuning failed!!!
> > >>> tune to:
> > 562000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> > (tuning failed)
> > WARNING: >>> tuning failed!!!
> > retrying with f=554000000
> > >>> tune to:
> > 554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> > (tuning failed)
> > WARNING: >>> tuning failed!!!
> > >>> tune to:
> > 554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> > (tuning failed)
> > WARNING: >>> tuning failed!!!
> > retrying with f=538000000
> > >>> tune to:
> > 538000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> > (tuning failed)
> > WARNING: >>> tuning failed!!!
> > >>> tune to:
> > 538000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> > (tuning failed)
> > WARNING: >>> tuning failed!!!
> > dumping lists (30 services)
> > Done.
> > ============================================
> > --
> > Regards
> > Joacim
> >
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20070829/8a1b5a55/attachment.htm 