[mythtv-users] Live TV not working

[Jim]

I am having some issues with live playback.  It just started after a reboot, I havent changed anything since it was installed.  The mythfrontend end returns 'TV Error: LiveTV not successfully started' and the channels are all black.  I am thinking its the ivtv driver?  Any ideas?

ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.10.3 (tagged release) loading
ivtv:  Linux version: 2.6.20-1.2952.fc6 SMP mod_unload
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge card (cx23415 based)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
input: PC Speaker as /class/input/input3
nvidia: module license 'NVIDIA' taints kernel.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
sd 0:0:0:0: Attached scsi generic sg0 type 0
Floppy drive(s): fd0 is 1.44M
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
FDC 0 is a post-1991 82077
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02060039
ivtv0: Decoder revision: 0x02020023
tveeprom 0-0050: Hauppauge model 48132, rev K268, serial# 9888664
tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 0-0050: audio processor is MSP4448 (idx 27)
tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-350
saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
ivtv0: Failed to load module saa7127
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPEG (1 MB)
ivtv0: Registered device vbi8 for decoder VBI (1 MB)
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV (1 MB)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0xc008561c!
ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0x4008646d!
ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0xc008561c!
ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0xc008561c!
ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0xc008561c!
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv:  ====================  END INIT IVTV  ====================