[mythtv-users] How much horespower for frontend?
James Pifer
jep at obrien-pifer.com
Tue Sep 26 23:50:43 UTC 2006
> Ahh (I just erased a long post because I see the problem)...
>
> You can not use /dev/hda1 with hdparm -d you must use the drive
> itself.
>
> hdparm -d1 /dev/hda
> Also can you post the output of just hdparm /dev/hda
>
Below are the results from dma settings on both machines. Also, I do
have another machine I would be willing to swap out and use for this
purpose. It's a 2.6 Ghz Celeron with 1.5 GB RAM. Would this machine need
to be my backend as well, or could it just be the frontend? Honestly I
would like it to function as both so I can take advantage of the
hauppauge cards for the remote. But for testing purposes I could throw
linux and a frontend on it to see if it works better. What do you
suggest?
Results below.
Thanks,
James
Here are the results from the backend machine:
[root at mythtv ~]# hdparm -tT /dev/hda; hdparm -tT /dev/hdb; hdparm -
tT /dev/hdc; hdparm -tT /dev/hdd;
/dev/hda:
Timing cached reads: 612 MB in 2.01 seconds = 304.29 MB/sec
Timing buffered disk reads: 154 MB in 3.03 seconds = 50.78 MB/sec
/dev/hdb:
Timing cached reads: 624 MB in 2.00 seconds = 311.32 MB/sec
Timing buffered disk reads: 66 MB in 3.03 seconds = 21.78 MB/sec
/dev/hdc:
Timing cached reads: 628 MB in 2.01 seconds = 312.34 MB/sec
Timing buffered disk reads: 76 MB in 3.07 seconds = 24.77 MB/sec
/dev/hdd:
Timing cached reads: 620 MB in 2.01 seconds = 308.01 MB/sec
Timing buffered disk reads: 74 MB in 3.02 seconds = 24.49 MB/sec
[root at mythtv ~]#
hdparm /dev/hda;hdparm /dev/hdb;hdparm /dev/hdc;hdparm /dev/hdd;
/dev/hda:
multcount = 16 (on)
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 24321/255/63, sectors = 390721968, start = 0
/dev/hdb:
multcount = 16 (on)
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 19386/16/63, sectors = 19541088, start = 0
/dev/hdc:
multcount = 16 (on)
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 19929/255/63, sectors = 320173056, start = 0
/dev/hdd:
multcount = 16 (on)
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 19929/255/63, sectors = 320173056, start = 0
Here are the results from the frontend machine:
[root at mythtv2 ~]# hdparm -tT /dev/hda; hdparm -tT /dev/hdb; hdparm -
tT /dev/hdc; hdparm -tT /dev/hdd;
/dev/hda:
Timing cached reads: 624 MB in 2.00 seconds = 311.94 MB/sec
Timing buffered disk reads: 46 MB in 3.03 seconds = 15.16 MB/sec
/dev/hdc:
Timing cached reads: 624 MB in 2.00 seconds = 311.85 MB/sec
Timing buffered disk reads: 76 MB in 3.05 seconds = 24.90 MB/sec
/dev/hdd:
Timing cached reads: 632 MB in 2.01 seconds = 314.93 MB/sec
Timing buffered disk reads: 74 MB in 3.01 seconds = 24.61 MB/sec
[root at mythtv2 ~]#
hdparm /dev/hda;hdparm /dev/hdb;hdparm /dev/hdc;hdparm /dev/hdd;
/dev/hda:
multcount = 16 (on)
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 13328/15/63, sectors = 12594960, start = 0
/dev/hdc:
multcount = 16 (on)
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 24321/255/63, sectors = 390721968, start = 0
/dev/hdd:
multcount = 16 (on)
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 19457/255/63, sectors = 312581808, start = 0
[root at mythtv2 ~]#
More information about the mythtv-users
mailing list