[mythtv-users] Problem with FusionHDTV5 Lite and pcHDTV support

[David McKenzie]

You're right, thats exactly what it is. No DVB support was compiled in. I'll
get that fixed up and hopefully everything will be working properly. Thanks
for the help.

On 9/22/06, David McKenzie <krisp at krisp.com> wrote:
>
> I dont see any options for configuring it as a plain old DVB device in
> myth-setup, the only option I have for and hd card is the pchdtv driver.
> Perhaps im missing an option with the compile?
>
> On 9/22/06, jack snodgrass <mrlinuxgroups at gmail.com> wrote:
> >
> > On 9/22/06, Kevin Kuphal <kuphal at dls.net> wrote:
> > > David McKenzie wrote:
> > > > Hello everybody.
> > > >
> > > > I have been trying to get QAM256 over cable working for about a week
> >
> > > > now with out any success. I am using a dvico fusionhdtv5 lite card.
> > I
> > > > have a working channels.conf that I generated using documentation in
> > > > the wiki, and I can view the channels using mplayer. However, I can
> > > > not get mythtv to tune any of the channels.
> > > >
> > > > I have tried using the QAM256 auto scan, and either get no signal or
> > > > no tables on any channel. I have tried adding the transports to
> > > > dtv_multiplex and scanning only them, still nothing. I have even
> > tried
> > > > modifying channel table to use the proper frequencies and serviceids
> > > > to no avail. I also get this error message using 0.20 or the svn
> > > > message when ever I try to tune to an hd channel using mythtv-setup
> > > > (scanning):
> > > >
> > > > pcHDTV:GetSignal_V4l1(fd 11, input 3, v4l2) error(Invalid argument)
> > > >
> > > > (the fd and input change sometimes after reboot)
> > > >
> > > > I have taken a look at the source for the pchdtv scanner and tried
> > > > setting input to 0 because it had a different test nested inside an
> > if
> > > > statement but that didn't help any. I know the HDTV works because I
> > > > can view it in mplayer. I'd love to get it working in myth.
> > > I don't know much about this card, but why are you using the pcHDTV
> > > option with this card?  Shouldn't it be just a regular DVB device?
> > >
> > > Kevin
> > > _______________________________________________
> > > mythtv-users mailing list
> > > mythtv-users at mythtv.org
> > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> > >
> >
> > I'm not doing any 'qcam'.. just plain old OTA ATSC. I acecss the
> > card as a DVB device and Myth tunes it just fine.
> >
> > jack
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20060922/257a0255/attachment.htm