[mythtv-users] Temperature on status screen

[Phill Edwards]

> It sounds like Axel's RPMs don't have this, as lm_sensors is also
> working on my box, but I see nothing on the status screen, either.
>
> The existence of lm_sensors seems one of the more odd things to check
> for on the build system. That should be a run-time check.

Axel has updated the RPMs now but I'm still not seeing anything on the
status screen. Here's a screenshot -
http://www.oaklands.aust.com/mythtv/system_status.png

And here's the putput when I run sensors at the command prompt (to
show that I have configured lm_sensors):

$ sensors
it8712-isa-0290
Adapter: ISA adapter
VCore 1:   +1.38 V  (min =  +1.42 V, max =  +1.57 V)   ALARM
VCore 2:   +2.54 V  (min =  +2.40 V, max =  +2.61 V)
+3.3V:     +3.28 V  (min =  +3.14 V, max =  +3.47 V)
+5V:       +4.19 V  (min =  +4.76 V, max =  +5.24 V)   ALARM
+12V:     +11.84 V  (min = +11.39 V, max = +12.61 V)
-12V:     -16.07 V  (min = -12.63 V, max = -11.41 V)   ALARM
-5V:       -8.17 V  (min =  -5.26 V, max =  -4.77 V)   ALARM
Stdby:     +2.98 V  (min =  +4.76 V, max =  +5.24 V)   ALARM
VBat:      +4.08 V
Case Fan: 1163 RPM  (min = 3013 RPM, div = 8)          ALARM
M/B Temp:    +25°C  (low  =   +15°C, high =   +40°C)   sensor = thermistor
CPU Temp:    +25°C  (low  =   +15°C, high =   +45°C)   sensor = thermistor
CPU Temp:    +41°C  (low  =   +15°C, high =   +45°C)   sensor = diode

Any ideas how to get it to show up in the status screen?

Regards,
Phill