[mythtv-users] DVB-S has stopped working

[Andrew Lyon]

>
>
>
> I have just upgraded to version 0.20 from version 0.19-fixes and
> found the following error on startup:
>
>
> 2006-09-13 07:54:24.334 DiSEqCDevTree, Warning: No device tree for
> cardid 3
> 2006-09-13 07:54:27.358 send_diseqc FE_DISEQC_SEND_MASTER_CMD failed
>                          eno: Unknown error 524 (524)
> 2006-09-13 07:54:27.359 DiSEqCDevTree, Error: DiSEqC command failed
>                          eno: Unknown error 524 (524)
> 2006-09-13 07:54:27.359 DiSEqCDevTree, Error: DiSEqC reset failed
>                          eno: Unknown error 524 (524)
> 2006-09-13 07:54:27.445 DVBChan(1) Warning: Your frequency setting
> (10832250) is out of range. (min/max:950000/2150000)
> 2006-09-13 07:54:27.485 DiSEqCDevTree, Error: No root device tree node!
> 2006-09-13 07:54:27.485 DVBChan(1) Error: Tune(): Failed to setup
> DiSEqC devices
> 2006-09-13 07:54:27.485 DVBChan(1) Error: SetChannelByString(10099):
> Tuning to frequency.
> 2006-09-13 07:54:27.495 DVBChan(1) Warning: Your frequency setting
> (12226500) is out of range. (min/max:950000/2150000)
> 2006-09-13 07:54:27.496 DiSEqCDevTree, Error: No root device tree node!
> 2006-09-13 07:54:27.496 DVBChan(1) Error: Tune(): Failed to setup
> DiSEqC devices
> 2006-09-13 07:54:27.496 DVBChan(1) Error: SetChannelByString(5802):
> Tuning to frequency.
> 2006-09-13 07:54:27.496 TVRec(3) Error: Setting start channel '10099'
> failed,
>                          and backup '5802' failed as well.
>
>
>
>
> Has something changed which requires a reconfig? DVB-S was working
> fine prior to the upgrade.
>
> Thanks,
>
>
> Chris

I found I had to add one DiSEqC device in order to get dvb-s working,
the LNB !, once that was in place I was able to do a initial tuned
scan followed by a transport scan to pick up all the channels.

Andy