[mythtv-users] PVR-150 Knoppmyth R5D1 and issue with tuner

[cossaboon.mythtv at mac.com]

I moved from DirecTV to Adelphia / Comcast cable. I have removed the  
SVideo in to the PVR-150, and connected a coax directly to the PVR. I  
re-ran setup, but the setup only sees channel 5. Other channels have  
audio but static.

I have placed a TV on the Coax and I get picture.

Any Ideas on where the issue is. I saw that there was some issues  
with R5D1 and the tuner but the mine seems to be ok, here is the dmesg


-=-=-=-=-=-
lirc_dev: IR Remote Control driver registered, at major 61
ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.7.0 (tagged release) loading
ivtv:  Linux version: 2.6.17-chw-8 SMP preempt mod_unload 586 gcc-3.4
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 16 (level, low) -> IRQ 18
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
msp3400 1-0040: MSP3445G-B8 found @ 0x80 (ivtv i2c driver #0)
msp3400 1-0040: MSP3445G-B8 supports radio, mode is autodetect and  
autoselect
tveeprom 1-0050: Hauppauge model 32062, rev B185, serial# 7477777
tveeprom 1-0050: tuner model is TCL 2002N 6A (idx 85, type 50)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is MSP3445 (idx 12)
tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
tveeprom 1-0050: has no radio, has IR remote
ivtv0: Corrected autodetection from Hauppauge WinTV PVR-150 to  
Hauppauge WinTV PVR-250
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB  
total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB  
total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB  
total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers  
(2048KB total)
tuner 1-0061: type set to 50 (TCL 2002N)
ivtv0: Initialized Hauppauge WinTV PVR-250, card #0
ivtv:  ====================  END INIT IVTV  ====================
cx2388x v4l2 driver version 0.0.5 loaded
-=-=-=-=-=-=--=