[mythtv-users] pcHDTV HD3000 voo doo

[Yan Seiner]

I am trying to configure a Myth 0.20 system, with a pcHDTV HD3000 card.  
The system currently has two tuners, a PVR150 and a HD3000.

Myth will let me set it up as either a MJPEG card or a V4L card, but 
when I go to channel scan, it only offers me one choice, my PVR150.

I've tried all sorts of things, but it seems to be determined not to 
actually let me use this card.

In myth-setup, should I be using the MJPEG entry or the V4L2 entry?  
(/dev/video0 or /dev/vbi0?)  Is there some other incantation I need to 
be doing?

Here's a snippet from dmesg:

cx2388x dvb driver version 0.0.6 loaded
cx2388x v4l2 driver version 0.0.6 loaded
CORE cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV 
[card=22,autodetected]
cx88[0]/2: found at 0000:03:01.2, rev: 5, irq: 177, latency: 32, mmio: 
0xe6000000
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
cx88[0]/0: found at 0000:03:01.0, rev: 5, irq: 177, latency: 32, mmio: 
0xe5000000
tuner 1-0043: chip found @ 0x86 (cx88[0])
tuner 1-0061: chip found @ 0xc2 (cx88[0])
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0

--Yan