[mythtv-users] dish322 and lircd.conf for myth

[Endaf Jones]

Yea, there's several things wrong with that lircd.conf.  Try this
instead (remember to correctly set the post_data field for your
correct device ID.  You "may" have to tune the timing slightly for
your CPU speed and such (if your using a serial transmitter).  I've
been meaning to submit this into lirc for quite some time.

-----------------------------------
begin remote
  name            serial-echostar
  flags           SPACE_ENC|NO_HEAD_REP
  eps             30
  aeps            100

  frequency       56000
#  duty_cycle      32

  one             440  1645
  zero            440  2780

  header          525  6045
  ptrail          450
  gap             6115

  min_repeat      6

  bits            6
  post_data_bits  10


# unit code selection (1-16)
#  1=0x000  2=0x200  3=0x100  4=0x300
#  5=0x080  6=0x280  7=0x180  8=0x380
#  9=0x040 10=0x240 11=0x140 12=0x340
# 13=0x0C0 14=0x2C0 15=0x1C0 16=0x3C0

  post_data       0x000


  begin codes
    1           4
    2           5
    3           6
    4           8
    5           9
    6           10
    7           12
    8           13
    9           14
    0           17
    power_on    1
    select      16
    cancel      18
  end codes
end remote
-----------------------------------

# Endaf

On 10/7/06, John H. <mistamaila at gmail.com> wrote:
> ok, off this page, i got this information for lircd.conf
> http://www.htpcug.com/Multi.htm
>
> begin remote
>
>  name  DISH_1
>  bits           16
>  flags SPACE_ENC|NO_HEAD_REP
>  eps            30
>  aeps          100
>
>  header        350  6000
>  one           324  2800
>  zero          324  1700
>  ptrail        324
>  gap          6000
>  min_repeat      2
>  toggle_bit      0
>  frequency    40000
>
>     begin codes
>         tv/video                 0x000000000000A3FF
>         power                    0x000000000000F7FF
>         menu                     0x000000000000D3FF
>         page_up                  0x000000000000C3EF
>         page_down                0x000000000000E3EF
>         guide                    0x000000000000AFFF
>         pointer_up               0x00000000000097FF
>         pointer_left             0x0000000000008FFF
>         pointer_right            0x0000000000009FFF
>         pointer_down             0x00000000000087FF
>         select                   0x000000000000BFFF
>         recall                   0x00000000000093FF
>         info                     0x000000000000FFFF
>         view                     0x000000000000A7FF
>         cancel                   0x000000000000B7FF
>         sys_info                 0x0000000000006FFF
>         record                   0x00000000000083FF
>         1                        0x000000000000EFFF
>         2                        0x000000000000EBFF
>         3                        0x000000000000E7FF
>         4                        0x000000000000DFFF
>         5                        0x000000000000DBFF
>         6                        0x000000000000D7FF
>         7                        0x000000000000CFFF
>         8                        0x000000000000CBFF
>         9                        0x000000000000C7FF
>         0                        0x000000000000BBFF
>         *                        0x0000000000006BFF
>         #                        0x00000000000067FF
>     end codes
>
> end remote
>
>
>
> it works now when i do
>
> irsend SEND_ONCE DISH_1 info
>
> works, and it pops up on my screen, but every other command seems to
> not work! lircd debug says "remote not supported"
>
> any ideas?
>
> On 10/7/06, John H. <mistamaila at gmail.com> wrote:
> > hi, i saw some previous posts about people using dish322 with myth.  i
> > have dish322, usb-uirt blaster, and need
> >
> > /etc/lircd.conf to use so that myth can change channels
> >
> > the channel changer script.
> >
> > thanks!
> >
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>


-- 
# Endaf