[mythtv-users] Possible XvMC prebuffering issues solution?
Jan Vilhuber
jan at vilhuber.com
Thu Nov 30 23:12:59 UTC 2006
On Nov 30, 2006, at 2:28 PM, Michael Tiller wrote:
> On 11/30/06, Jan Vilhuber <jan at vilhuber.com> wrote:
> try starting X with -logverbose 6 and see. In my case, it prints out
> a bunch of built-in and edid-derived modelines, and also why some
> modes are rejected..
>
> jan
>
> Hmmm...
>
> Well, this is what my X log says:
>
> (II) NVIDIA(0): NVIDIA GPU GeForce4 MX 4000 at PCI:0:9:0
> (--) NVIDIA(0): VideoRAM: 65536 kBytes
> (--) NVIDIA(0): VideoBIOS: 04.18.20.39.07
> (--) NVIDIA(0): Interlaced video modes are supported on this GPU
> (--) NVIDIA(0): Connected display device(s) on GeForce4 MX 4000 at
> PCI:0:9:0:
> (--) NVIDIA(0): NVIDIA TV Encoder (TV-0)
> (--) NVIDIA(0): NVIDIA TV Encoder (TV-0): 350.0 MHz maximum pixel
> clock
> (--) NVIDIA(0): TV encoder: NVIDIA
> (II) NVIDIA(0): Assigned Display Device: TV-0
> (WW) NVIDIA(0): No valid modes for "720x480_60"; removing.
> (WW) NVIDIA(0): No valid modes for "NTSC_60i"; removing.
> (WW) NVIDIA(0):
> (WW) NVIDIA(0): Unable to validate any modes; falling back to the
> default mode
> (WW) NVIDIA(0): "nvidia-auto-select".
> (WW) NVIDIA(0):
> (II) NVIDIA(0): Validated modes:
> (II) NVIDIA(0): "nvidia-auto-select"
> (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
>
>
This doesn't look like a 'logverbose 6' output....
Shut down the window manager (assuming you have it running), and then
run:
X -logverbose 6 -probeonly
I have a LOT of output from that. More than you want to post to the
list, for sure.
jan
> It apparently doesn't like my modelines and modes. Here is a
> snippet from my xorg.conf...
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "27in Analog TV"
> HorizSync 30.0 - 50.0
> #VertRefresh 60.0 - 60.0
> Option "dpms"
> Option "UseEdidDpi" "FALSE"
> Option "DPI" "100 x 100"
> ModeLine "NTSC_60i" 14.318 768 784 848 910 483 484 492 525
> Interlace
> Modeline "720x480_60" 26.72 720 736 808 896 480 481 484
> 497 -HSync +Vsync
> EndSection
>
> I got the first Modeline from the MythTV modeline page in Wiki and
> the second was generated by gtf.
>
> Then I use them as follows:
>
> Section "Screen"
> Identifier "Screen0"
> Device "Videocard0"
> Monitor "Monitor0"
> DefaultDepth 24
> SubSection "Display"
> Depth 24
> # #Modes "1024x768_60" "800x600_60" "640x480_60"
> # #Modes "800x600_60" "640x480_60"
> Modes "720x480_60" "NTSC_60i"
> EndSubSection
> EndSection
>
> Can anybody see why these should be rejected? Remember, I'm
> outputting to a TV, not a monitor.
>
> --
> Mike
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
More information about the mythtv-users
mailing list