[mythtv-users] modelines and NVIDIA binary driver

Matt Mossholder matt at mossholder.com
Sat Nov 25 17:17:16 UTC 2006


On Sat, 2006-11-25 at 10:31 -0600, Mike Miller wrote:
> The DVI to HDMI cable has nothing to do with Modelines working or not.  
> There is a definite bug in the NVIDIA driver with interlaced modes.
> 
> This is what happens in my case:
> 1) The NVIDIA driver loads and reads the EDID
> 2) The EDID gives the max size to 540
> 3) The NVIDIA driver reads the Modeline:
> ModeLine       "ATSC-1080-60i" 182.28 1920 2008 2052 2200 540 542 547 
> 562 +HSync +vsync Interlace
> 4) The NVIDIA driver loads that line and creates a Bounding Box for the 
> size (pans the screen half on top and half on bottom)

This is a known bug in specific versions of the nVIDIA binary driver. If
I remember the workaround correctly, it is to use one of the nVIDIA
autogenerated modlines, that has a 120 timing, like this:


==========

SubSection "Display"
                Viewport        0 0
                Depth           24
                Modes           "1920x1080_120i"
EndSubSection

==========

No need to specify the modline elsewhere, as long as EDID is present.
You might also need:

==========

Option          "ModeValidation"        "NoVertRefreshCheck"

==========

... in the nvidia device section.


Note that you will probably also run into the "crash when using XvMC on
interfaces other than VGA with interlaced video modes" bug. That one has
been around forever :(


		--Matt





More information about the mythtv-users mailing list