[mythtv-users] Audio from SAA7134
Phil Foxton
phil at thefoxtons.org.uk
Fri Nov 24 13:23:03 UTC 2006
--
Phil Foxton RHCE
---------- Original Message -----------
From: "Andrew Osborn" <aosborn at gmail.com>
To: mythtv-users at mythtv.org
Sent: Fri, 24 Nov 2006 07:09:01 -0600
Subject: [mythtv-users] Audio from SAA7134
> Hello All,
>
> Has anyone had problems getting an SAA7134 TV Tuner card working?
> Mine is not being detected as an audio device, and I'm not sure what
> steps I have to go through to get it in the audio device list. The
> card is a Compro VideoMate TV Gold Plus which uses the SAA7134
> driver (I use: # modprobe saa7134 card=41 tuner=17).
>
> Currently my video works perfect but I get no audio from television.
>
> I rule out my sound card and the line-in/out settings by plugging my
> speakers direcly into the line-out of the tuner. I used to do that on
> my last card and it would have sound, just the preproccessed sound so
> it's 2 seconds lagged.
>
> >From reading Wiki's it seems this card is generally plug and play. But
> I can't get it to work. I'm fairly good at Linux for server
> configurations but not much for desktop things such as audio/video.
> So I don't know where to start for troubleshooting.
>
> These are some outputs from commands:
>
> # arecord -l
>
> **** List of CAPTURE Hardware Devices ****
> card 0: ICH5 [Intel ICH5], device 0: Intel ICH [Intel ICH5]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
> card 0: ICH5 [Intel ICH5], device 1: Intel ICH - MIC ADC [Intel ICH5
> - MIC ADC] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: ICH5
> [Intel ICH5], device 2: Intel ICH - MIC2 ADC [Intel ICH5 - MIC2 ADC]
> Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: ICH5 [Intel
> ICH5], device 3: Intel ICH - ADC2 [Intel ICH5 - ADC2] Subdevices:
> 1/1 Subdevice #0: subdevice #0
>
> This shows my onboard audio as the only audio device. My tuner should
> be listed. That's the main problem.
>
> # lspci -v
>
> 0000:01:01.0 Multimedia controller: Philips Semiconductors
> SAA7133/SAA7135 Video Broadcast Decoder (rev 10)
> Subsystem: Compro Technology, Inc. VideoMate TV
> Flags: bus master, medium devsel, latency 32, IRQ 22
> Memory at ffcee800 (32-bit, non-prefetchable) [size=2K]
> Capabilities: [40] Power Management version 2
>
> That is my tuner.
>
> If I need to do some configurations/compiling of a driver or the
> kernel I'll need step by steps because I've never done it before.
>
> These links have helped a bit for configuration. I've done what they
> did but with no success:
> http://www.mythtv.org/wiki/index.php/Compro_VideoMate_TV_Gold_Plus
> I use:
> modprobe saa7134 card=41 tuner=17
> http://www.linuxtv.org/v4lwiki/index.php/Compro_VideoMate_TV_Gold-
> Plus http://gentoo-wiki.com/HARDWARE_saa7134
>
> I'm currently using the newest version of KnoppMyth and MythTV. But I
> also had this problem using the newest version of Debian (which
> Knoppix is based on so that was to be expected).
>
> Any help troubleshooting this would be greatly appreciated.
>
> Thanks!
>
I also find that i2c_scan=1 added to the modprobe helps, as well as ensuring
you have saa7134-dvb loaded too. This is for Compro DVB-t300.
More information about the mythtv-users
mailing list