[mythtv-users] Problems with HDHomerun

[Michael Tiller]

I have a few more details by turning "-v all" on for the backend.  I now get
the following additional information in the log file:

2006-11-21 10:00:05.564 Using profile 'Low Quality' to record
2006-11-21 10:00:05.608 RecBase(2): SetRingBuffer(0x82c0700)
'/video/library/2638_20061121100000.mpg'
2006-11-21 10:00:05.742 RecBase(2): SetRecording(0x832e5e0) title(Sesame
Street)
2006-11-21 10:00:05.901 MSqlQuery: SELECT channel.videofilters FROM channel
WHERE channum  = '43' AND       sourceid = 2
2006-11-21 10:00:06.124 HDHRRec(2): StartRecording -- begin
2006-11-21 10:00:06.185 HDHRRec(2): Open()
2006-11-21 10:00:06.187 HDHRRec(2): StartData()
2006-11-21 10:00:06.189 TVRec(2): SetFlags(RecorderRunning,RingBufferReady,)
->
RunMainLoop,AskAllowRecording,NeedToStartRecorder,RecorderRunning,RingBufferReady,
2006-11-21 10:00:06.194 TVRec(2): ClearFlags(NeedToStartRecorder,) ->
RunMainLoop,AskAllowRecording,RecorderRunning,RingBufferReady,


Any ideas?  Unfortunately, to me this seems pretty thin with diagnostic
information.  Any and all help greatly appreciated.  Thanks.

--
Mike

On 11/21/06, Michael Tiller <michael.tiller at gmail.com> wrote:
>
> I'm trying out my HDHomerun.  The hardware seems to be working, but the
> problems seem to be related to MythTV.  I say this because I can send data
> to my Windows machine running VLC and things basically seem to work
> (occasionally I have some problems but I suspect they may be station
> specific...I just don't have enough data yet to say).
>
> Anyway, on the MythTV side, my backend seems to be dying whenever I try to
> record.  I tried a test case and the log says this:
>
> 2006-11-20 13:00:16.993 TVRec(2): Changing from None to RecordingOnly
> 2006-11-20 13:00: 17.299 TVRec(2): HW Tuner: 2->2
> 2006-11-20 13:00:17.436 HDHRChan(ffffffff/1): device found at address
> 192.168.1.119
> 2006-11-20 13:00:17.847 Started recording: Blind Date: channel 2623 on
> cardid 2, sourceid 2
> 2006-11-20 13:00:19.388 Reschedule requested for id 0.
> 2006-11-20 13:00:20.973 New DB connection, total: 4
> 2006-11-20 13:00:21.479 New DB connection, total: 5
> 2006-11-20 13:00:22.279 Connected to database 'mythconverg' at host:
> localhost
> 2006-11-20 13:00:22.544 New DB connection, total: 6
> 2006-11-20 13:00:22.949 Connected to database 'mythconverg' at host:
> localhost
> 2006-11-20 13:00:24.113 New DB connection, total: 7
> 2006-11-20 13:00:24.142 Connected to database 'mythconverg' at host:
> localhost
> 2006-11-20 13:00:26.074 New DB connection, total: 8
> 2006-11-20 13:00:26.314 Connected to database 'mythconverg' at host:
> localhost
> 2006-11-20 13:00:27.403 Connected to database 'mythconverg' at host:
> localhost
> 2006-11-20 13:00:35.551 RingBuf(/video/library/1056_20061120113000.mpg):
> Waited 1.0 seconds for data to become available...
> 2006-11-20 13:00:48.242 Event socket closed. No connection to the backend.
> 2006-11-20 13:00: 56.649 RingBuf(/video/library/1056_20061120113000.mpg):
> Waited 1.0 seconds for data to become available...
>
> ...and then it dies apparently.
>
>
> Any suggestions?  As a bit more background right before recording I was
> sending the stream to VLC.  At the time the recording came around, the
> stream switched to the correct channel and I saw a few seconds of video
> before it cut off (presumably retargeting the stream at the backend).  So I
> know the tuner was working, that it was streaming valid data, etc.
>
> Other details that might be relevant:
>
>    - All the lineup stuff seems to be working in MythTV.
>    - I installed the latest firmware last night and the source is notQAM (it is 8vsb).
>    - I'm running MythTV 0.20 from the Ubuntu repositories (I don't know
>    if this is from the fixes branch but the protocol version is 31).
>
>
> --
> Mike
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20061122/afa9791b/attachment.htm