[mythtv-users] DVICO Fusion HDTV PCI and FC5 / Mythtv Setup

[jack snodgrass]

On 11/6/06, Nathan <ndc_82 at hotmail.com> wrote:
>
>
> Hey guys basically what i want to do is setup my new Dvico card with mythtv.
> Now i allready have another card setup which ISNT working with mythtv its a
> Compro Videomate dvb-t 300. But anyhow what is the correct process to setup
> the Dvico as when i installed it in the pc turned it on nothing happened.
>
> The only sign of FC5 seeing it is that it comes up in dmesg but not as a
> registered device.
>
> Any help would be great
>

Is it a 'light' or standard fusion card? I've got the 'light' version.
lspci shows:
01:09.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
01:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)

dmesg shows:
bttv0: Bt878 (rev 17) at 0000:01:09.0, irq: 66, latency: 32, mmio: 0xfdfff000
bttv0: detected: DViCO FusionHDTV 5 Lite [card=135], PCI subsystem ID
is 18ac:d500
bttv0: using: DViCO FusionHDTV 5 Lite [card=135,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: using tuner=64
tda9887 3-0043: chip found @ 0x86 (bt878 #0 [sw])
bt878: Unknown symbol bttv_read_gpio
bt878: Unknown symbol bttv_write_gpio
bt878: Unknown symbol bttv_gpio_enable
tuner 3-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner 3-0061: type set to 64 (LG TDVS-H062F/TUA6034)
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: add subdevice "dvb0"

... I had to move it to a different PCI slot on my motherboard before
it was recognized... probably had a shared irq conflict....

.. not sure if that info will help or not..

jack