[mythtv-users] Tuner type not set

[Brad Templeton]

On Tue, May 30, 2006 at 12:56:47PM -0700, Brad Templeton wrote:
> On Tue, May 30, 2006 at 09:33:41AM -0700, Andrew Kreps wrote:
> > I had that exact problem with 2.6.16 and my PVR-350.  After trying
> > ivtv 0.4.x and 0.6.2, I found that only 0.6.1 would actually work
> > properly.  If it's quick and easy to do, you may want to give the
> > 0.6.x branches a shot.
> > 
> 
> Sigh.   Well, that needs a upgrade to the latest kernel, which in turn
> means either building it myself, or the even more complex but worthwhile
> upgrade to FC5 to get an RPM of it.   Neither of which I have time to do
> today.  I'll have to do it when I get back and see if I can't downgrade
> the box with ivtv to the prior drivers.

Hmm.  I decided to try running ivtv 0.2, and still get the error, so it's
not the ivtv version, it seems.   The question then, is what is it?
I also replaced the in-kernel versions of msp3400, tveeprom, tuner and tda9887
with the ivtv versions as recommended.




ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.2.0 (tagged release) loading
ivtv: Linux version: 2.6.12-2.3.legacy_FC3smp SMP 686 REGPARM 4KSTACKS gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 250 card
ivtv: Found an iTVC16 based chip
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 18 (level, low) -> IRQ 169
ivtv: XXX PCI device: 0x2570 vendor: 0x8086
ivtv: i2c attach [client=tveeprom,ok]
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv: i2c attach [client=(tuner unset),ok]
saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
ivtv: i2c attach [client=saa7115,ok]
msp3400 0-0040: MSP3445G-B8 found @ 0x80 (ivtv i2c driver #0)
msp3400 0-0040: MSP3445G-B8 supports radio, mode is autodetect and autoselect
ivtv: i2c attach [client=MSP3445G-B8,ok]
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
ivtv: i2c attach [client=Hauppauge IR,ok]
lirc_dev: lirc_register_plugin: sample_rate: 10
tveeprom 0-0050: Hauppauge model 32062, rev B185, serial# 7476925
tveeprom 0-0050: tuner model is TCL 2002N 6A (idx 85, type 50)
tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 0-0050: audio processor is MSP3445 (idx 12)
tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
tveeprom 0-0050: has no radio, has IR remote
ivtv: Tuner Type 50, Tuner formats 0x00001000, Radio: yes, Model 0x00891615, Rev
ision 0x00000000
ivtv: NTSC tuner detected
ivtv: Radio detected
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 250 card with 5 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers  4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Setting Tuner 50
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
tuner 0-0061: tuner type not set
ivtv: Initialized WinTV PVR 250, card #0
ivtv: ====================  END INIT IVTV  ====================
ivtv: ivtv_enc_thread: pid = 5071, itv = 0xe0b71aa0

And all attempts to reference the tuner generate the "Tuner type not set" error.