[mythtv-users] HDTV reception via Cable
Christian Burger
christian.burger at abtg.net
Wed Mar 22 17:54:32 UTC 2006
-----Original Message-----
------------------------------
Message: 18
Date: Wed, 22 Mar 2006 10:14:12 -0500
From: "R. G. Newbury" <newbury at mandamus.org>
Subject: Re: [mythtv-users] HDTV reception via Cable
To: christian.burger at abtg.net, Discussion about mythtv
<mythtv-users at mythtv.org>
Message-ID: <442169C4.4040906 at mandamus.org>
Content-Type: text/plain; charset=iso-8859-1; format=flowed
Christian Burger wrote:
> Can you manually tune your card with azap or mplayer? I too am on Charter
> but using an Aver TVHD A180. Myth just won't tune the card no matter what
> I've tried, but mplayer will tune it via channels.conf. When you generate
> your channels.conf you are just doing atscscan atsc/us-Cable-Standard >
> channels.conf right?
We will need more information to be able to diagnose the problem.
It sounds like you have followed a guide but obviously something has
gone wrong... This is the wiki page:
http://www.mythtv.org/wiki/index.php/Adding_QAM_Channels_For_HDTV_Tuner_Card
s
Does "atscscan US-Cable-Standard-whatever-the-name-is-Frequencies" work?
It should give you a list of probably upwards of a couple of hundred
'channels' on 8 to 10 different frequencies. If you don't get
anything/much from one frequency set, try the other Frequency files and
modulation methods Your cable co may use a different transmission
standard on the cable, possibly not QAM-256.
Don't be surprised at the number of 'hits' you get. These 'hits' include
all of the encrypted (Pay-per-view etc) channels and all of the music
channels. In the Toronto area, I get 27 unencrypted digital channels on
Rogers, out of a scan of 404! (The music channels are probably actually
usable, with some poking and prodding of myth).
If you cannot get this far, TARFUN.... And I would suspect that the
hardware is bad...
Geoff
---------------------------------
I get a usable channels.conf that I am able to tune using mplayer.
So I am pretty confident the hardware works okay. I think the problem is
my sourceid. I tried the recommend azap -r STATION and dvbscan -c but it
lists all my channels (services) when I run it. I think I will go ahead and
beat my head on the wall as it will probably help my progress :)
More information about the mythtv-users
mailing list