[mythtv-users] xorg.conf for Epia SP13000
R. G. Newbury
newbury at mandamus.org
Sat Mar 18 17:53:22 UTC 2006
Firstly,
Warren,
Thank you for posting this. It looks nothing like mine, which is based
on Jarod's (for an M10000). I will have to do some more playing.
Sean,
Make sure that you have set the BIOS on the motherboard for output
through both the S-Video AND the VGA outputs.
The BIOS controls whether you get output through these ports.
The first time I tried to output to a TV with S-video I got nothing...
Sounds like you may have the same problem.
This is from Jarod's guide and is a section of his xorg.conf for an
M10000. Details will be different. He has the monitor commented out. I
haven't played with having both working at once (not sure its possible),
but the available switches imply that you can. He has both "ActiveDevice
TV" and "ActiveDevice CRT,TV" commented out....(huh?)
#Section "Monitor"
# Identifier "Monitor0"
# VendorName "Monitor Vendor"
# ModelName "Dell P991"
# DisplaySize 370 270
# HorizSync 30.0 - 107.0
# VertRefresh 48.0 - 120.0
# Option "dpms"
#EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Analog NTSC Television"
HorizSync 30.0 - 50.0
VertRefresh 60.0 - 60.0
Option "dpms"
EndSection
Section "ServerFlags"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "via"
VendorName "Via Technologies"
BoardName "CLE266 Unichrome"
Option "PciRetry" "true"
# Option "UseBIOS" "true"
# Option "ActiveDevice" "TV"
# Option "ActiveDevice" "CRT,TV"
Option "TVType" "NTSC"
# Option "TVOutput" "Composite"
# Option "TVDeflicker" "0"
Option "TVOutput" "S-Video"
# Option "TVOutput" "RGB"
Option "TVVScan" "over"
# Option "TVVScan" "under"
# Option "TVDotCrawl"
# Option "NoDDCValue"
# Option "HQVManualSwitch"
# Option "NoHQVVFilter"
# Option "CaptureOverScanOff"
# Option "Cap0Deinterlace" "Bob"
# Option "Cap0Deinterlace" "Weave"
# Option "Cap1Deinterlace" "Bob"
# Option "Cap1Deinterlace" "Weave"
# Option "Cap0FieldSwap"
# Option "NoCap0HFilter"
# Option "NoCap1HFilter"
Option "EnableAGPDMA" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "720x480" "640x480"
EndSubSection
Warren wrote:
> The xorg.conf for EPIA motherboards changes a lot depending on which
> driver, etc. This one is actually for use with the Open Chrome
> (www.openchrome.org) drivers, which if you are using an SP board you
> should be using instead of the Unichrome drivers built into the kernel,
> as those are really only meant for the EPIA-M motherboards. Good luck
> with this - it is the end result of many months of tweaking. It has
> lirc support built in but will allow for a failure of either the primary
> mouse or the lirc mouse without dying.
>
> Good Luck!
> Warren
>
>
> *Section "ServerLayout"
> Identifier "Default Layout"
> Screen "Screen0"
> InputDevice "Mouse0" "CorePointer"
> InputDevice "LIRC-Mouse" "SendCoreEvents"
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "ServerFlags"
> Option "DontVTSwitch"
> Option "AllowMouseOpenFail"
> EndSection
>
>
> Section "Files"
> RgbPath "/usr/X11R6/lib/X11/rgb"
> ModulePath "/usr/X11R6/lib/modules"
> FontPath "/usr/X11R6/lib/X11/fonts/misc/"
> FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
> FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
> FontPath "/usr/X11R6/lib/X11/fonts/CID/"
> FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
> FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
> EndSection
>
> Section "Module"
> Load "glx"
> Load "record"
> SubSection "extmod"
> Option "omit xfree86-dga"
> EndSubSection
> Load "dbe"
> Load "xtrap"
> Load "freetype"
> Load "type1"
> Load "dri"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "kbd"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "IMPS/2"
> Option "Device" "/dev/input/mice"
> Option "ZAxisMapping" "4 5"
> Option "Buttons" "5"
> EndSection
>
> Section "InputDevice"
> Identifier "LIRC-Mouse"
> Driver "mouse"
> Option "Device" "/dev/lircm"
> Option "Protocol" "IntelliMouse"
> Option "SendCoreEvents"
> Option "Buttons" "5"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "Monitor Model"
> HorizSync 20 - 90
> VertRefresh 50.0 - 75.0
> ModeLine "720x480" 26.7 720 736 808 896 480 481 484 497
> Modeline "720x480Over" 21.0 720 728 760 800 480 480 483 525
> -HSYNC +VSYNC
> EndSection
>
> Section "Device"
> Identifier "Via Unichrome CN400"
> Driver "via"
> Option "ActiveDevice" "TV"
> Option "TVType" "NTSC"
> Option "TVOutput" "S-Video"
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Via Unichrome CN400"
> Monitor "Monitor0"
> DefaultDepth 16
> Subsection "Display"
> Depth 16
> #Modes "720x480"
> Modes "720x480Over"
> EndSubSection
> EndSection
> *
>
--
R. Geoffrey Newbury
Barrister and Solicitor
Suite 106, 150 Lakeshore Road West
Mississauga, Ontario, L5H 3R2
905-271-9600 Fax 905-271-1638
newbury at mandamus.org
More information about the mythtv-users
mailing list