[mythtv-users] Phantom IR key presses?
Ben Lancaster
lists at benlancaster.co.uk
Tue Jun 6 23:24:14 UTC 2006
On 6 Jun 2006, at 00:45, Lee McLaren wrote:
> Ben Lancaster wrote:
>> On 5 Jun 2006, at 09:33, Lee McLaren wrote: Sam Varshavchik wrote:
>>> Ben Lancaster writes:
>>>> I have a working LIRC 0.8.0 CVS install using the Linux Input
>>>> Layer as the device, but there's something weird happening with
>>>> Myth. I'm getting quite regular phantom keypresses. For example,
>>>> in the guide, if I press down a few times, then up once, it'll
>>>> repeat the previous down command. irw reports the correct keys
>>>> being pressed, so the problem lies somewhere between the command
>>>> hitting mythtv from LIRC, and it performing it.
>>> I am guessing that u have digital tv card and the remote is being
>>> received by it and mapped as key presses
>> Correct!
>>> I found that if you stopped lircd while watching TV the number
>>> keys would still appear on the screen like you are direct
>>> inputing the channel, if that's the case post back and I will go
>>> into depth on what I had to do to fix.
>> consider this a post back! Thanks very much for offering to
>> help :D Ben _______________________________________________ mythtv-
>> users mailing list mythtv-users at mythtv.org http://mythtv.org/cgi-
>> bin/mailman/listinfo/mythtv-users
> Ok,
>
> This is how I fixed it:
>
> Read this wiki,
> http://www.linuxtv.org/v4lwiki/index.php/Remote_controllers
>
> Follow the bit under quick instructions and do the irrecord to
> create the config for your remote.
>
>
> Then change your hardware.conf so that it uses the event you found
> as in the wiki, my complete file is shown below for a reference:
> root at mythtv:/etc/lirc# cat hardware.conf
> # /etc/lirc/hardware.conf
> #
> #Try to load appropriate kernel modules
> LOAD_MODULES=true
> LIRCD_ARGS="-H dev/input -d /dev/input/event3"
>
> Save you irrecord file in the /etc/lirc dir as lircd.conf
>
> Edit your /home/mythtv/.mythtv/lircrc file to use the new keys and
> you are away.
>
Thanks Lee.
Unfortunately, this hasn't solved my problems :( They're no better!
Out of interest, which card/remote are you using? I'm on a Compro
VideoMate DVB-T300 (saa7134 based)
Ben
More information about the mythtv-users
mailing list