[mythtv-users] Module symbol errors with IVTV 0.6.2 and Linux 2.6.16.19 on Debian unstable

[David Pettit]

Sorry about the MS Outlook crap.  I told it to use plain text this time.

I recompiled the kernel with the relevant modules and the symbol errors went
away, however I'm still having problems.  Here are the log messages from
when I try to load the ivtv module:

ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.6.2 (tagged release) loading
ivtv:  Linux version: 2.6.16.19 PENTIUM4 gcc-4.0
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 16
wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0)
cx25840 3-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
tveeprom 3-0050: Hauppauge model 26032, rev C199, serial# 8750902
tveeprom 3-0050: tuner model is TCL 2002N 5H (idx 99, type 50)
tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 3-0050: audio processor is CX25841 (idx 35)
tveeprom 3-0050: decoder processor is CX25841 (idx 28)
tveeprom 3-0050: has no radio, has IR remote
tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv0: unable to open firmware v4l-cx2341x-enc.fw
ivtv0: did you put the firmware in the hotplug firmware directory?
ivtv0 warning: failed loading encoder firmware
ivtv0 warning: Error loading firmware -3!
ivtv: probe of 0000:05:04.0 failed with error -12
ivtv:  ====================  END INIT IVTV  ====================

It says it can't open the firmware, however I did put the files in the
hotplug directory.  Here's the contents of /usr/lib/hotplug/firmware/

v4l-cx2341x-dec.fw
v4l-cx2341x-enc.fw
v4l-cx2341x-init-mpeg.bin
v4l-cx2341x-init.mpg
v4l-cx25840.fw

I downloaded these off the ivtvdriver.org website
(http://dl.ivtvdriver.org/ivtv/firmware/firmware.tar.gz).  Is there
something for hotplug that's missing from the kernel?  

Thanks,

David