[mythtv-users] FC5 and Fusion DVB-T Dual Digital

[Kevin Hayes]

On Thu, 27 Jul 2006 11:51:21 +1000
"Anthony Goddard" <anthony at bondimaging.com> wrote:

> Hi There,
> Thanks for the info.
> 
> Currently "dmesg | grep dvb-usb" returns the following:
> 
> [mythtv at mythtv ~]$ dmesg | grep dvb-usb
> dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in cold state, will
> try to load a firmware
> dvb-usb: downloading firmware from file 'dvb-usb-bluebird-01.fw'
> dvb-usb: generic DVB-USB module successfully deinitialized and
> disconnected.
> dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in warm state.
> dvb-usb: will pass the complete MPEG2 transport stream to the software
> demuxer.
> dvb-usb: no frontend was attached by 'DViCO FusionHDTV DVB-T Dual USB'
> dvb-usb: schedule remote query interval to 150 msecs.
> dvb-usb: DViCO FusionHDTV DVB-T Dual USB successfully initialized and
> connected.
> 
> 
> So far, all I've done to the box (after installing FC5) is:
> 
> 1)yum upgrade (about 700mb of updates)
> 2)yum install kernel-devel, yum install kernel-doc
> 3)ran the firmware script, and placed the .fw file in /lib/firmware
> 4)added the repo's from the wilson guide (atrmps, freshrpms)
> 5)ran yum install mythtv-suite
> 6)ran yum upgrade again which updated things from the mythtv-suite
> install (about 10mb I think)
> 
> 
> 
> 
> Any ideas? :-(
> 

Hi Anthony,
		i have recently got this card working successfully using 

	http://www.itee.uq.edu.au/~chrisp/Linux-DVB/DVICO/

though i still have some tuning problems it is properly recognized 
in mythtv-setup and i can tune a few channels.

Towards the end of dmesg i have ...

...
dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual USB).
DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
input: IR-receiver inside an USB DVB receiver as /class/input/input2
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: DViCO FusionHDTV DVB-T Dual USB successfully initialized and connected.
usbcore: registered new driver dvb_usb_cxusb
...

hth
-- 
Kevin Hayes