[mythtv-users] DVB-C scan hangs at 3%

[Peter Ras]

best i can think of is to emigrate (joking)
----- Original Message ----- 
From: "Thomas Börkel" <thomas at boerkel.de>
To: "mythtv-users" <mythtv-users at mythtv.org>
Sent: Thursday, July 27, 2006 12:08 PM
Subject: [mythtv-users] DVB-C scan hangs at 3%


HI!

Full scanning for DVB-C channels hangs at 3% with Signal Strength 0% and
Signal/Noise 0%.

DVB-C card is KNCONE. I live in Germany, using KabelBW.

dvbscan and kaffeine work.

Using MythTV 0.19.

Any advice/hints?

Thanks!

Thomas

2006-07-27 21:05:33.647 DVB#0 Old Params: freq(0) type(QAM)
2006-07-27 21:05:33.647 DVB#0 New Params: freq(346000000) type(QAM)
2006-07-27 21:05:33.648 dvbchannel.cpp:wait_for_backend: Status:
Signal,Carrier,
2006-07-27 21:05:33.648 DVB#0 DVBChannel::Tune: Frequency tuning successful.
2006-07-27 21:05:33.648 SWizScan: HandleTuneComplete()
2006-07-27 21:05:33.649 SWizScan: ScanTransports()
2006-07-27 21:05:33.649 SIScan(0): ScanTransports()
2006-07-27 21:05:33.649 FillPMap(str dvb)
2006-07-27 21:05:33.650 FillPMap(SIS dvb)
2006-07-27 21:05:33.650 SIParser: Requesting PAT
2006-07-27 21:05:33.651 SIScan(0): Starting SIScanner
2006-07-27 21:05:34.634 SIParser: Table[0]->RequirePIDs() == true
2006-07-27 21:05:34.634 DVBSIParser: Adding PID 0x   0 Filter 0x 0 Mask
0xff Buffer 40960
2006-07-27 21:05:34.645 SIParser: Table[2]->RequirePIDs() == true
2006-07-27 21:05:34.645 DVBSIParser: Adding PID 0x1ffb Filter 0xff Mask
0x 0 Buffer 40960
2006-07-27 21:05:34.645 SIParser: Table[3]->RequirePIDs() == true
2006-07-27 21:05:34.645 DVBSIParser: Adding PID 0x1ffb Filter 0xff Mask
0x 0 Buffer 40960
2006-07-27 21:05:34.645 SIParser: Table[6]->RequirePIDs() == true
2006-07-27 21:05:34.645 DVBSIParser: Adding PID 0x  10 Filter 0x40 Mask
0xff Buffer 40960
2006-07-27 21:06:56.197 SIParser: SECTION_SYNTAX_INDICATOR = 0 -
Discarding Table (c8)


_______________________________________________
mythtv-users mailing list
mythtv-users at mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users